| Planning | Form: (02 )
400503628
12/20/2013 | The nearest building unit is located 1,190’ away from this well, therefore it is not within a Designated Setback Location and is exempt from 604.c. |
| Drilling/Completion Operations | Form: (02 )
400503628
12/20/2013 | Kerr McGee acknowledges and will comply with the COGCC Policy for Bradenhead Monitoring during Hydraulic Fracturing Treatments in the Greater Wattenberg Area dated May 29, 2012. |
| Drilling/Completion Operations | Form: (02 )
400503628
12/20/2013 | Prior to drilling operations, Operator may perform an anti-collision review of existing offset wells that have the potential of being within close proximity of the proposed well. This anti-collision review may include MWD or gyro surveys and surface locations of the offset wells with included error of uncertainty per survey instrument, and compared against the proposed wellpath with its respective error of uncertainty. If current surveys do not exist for the offset wells, Operator may have gyro surveys conducted to verify bottomhole location. The proposed well may only be drilled if the anti-collision review results indicate that the risk of collision is sufficiently low as defined by the anti-collision plan, with separation factors greater than 1.5, or if the risk of collision has been mitigated through other means including shutting in wells, plugging wells, increased drilling fluid in the event of lost returns or as is appropriate for the specific situation. In the event of an increased risk of collision, that risk will be mitigated to prevent harm to people, the environment or property. For the proposed well, upon conclusion of drilling operations, an as-constructed directional survey will be submitted to COGCC with the Form 5.
At the time of permitting, the operator has identified the following well(s) as being within close proximity of the proposed well(s): HSR-CONNIE 1-18 (ANTI-COLLISION)
|
| Planning | Form: (04 )
404361953
9/25/2025 | Site lighting will be shielded and directed downward and inward toward operations to avoid glare on public roads and nearby Building Units. |
| Community Outreach and Notification | Form: (04 )
404361953
9/25/2025 | Signs will be placed in conspicuous locations and will include Oxy contact information; the Oxy Stakeholder Relations team will respond to all community member inquiries. The signs will be placed so as not to create a potential traffic hazard. |
| Community Outreach and Notification | Form: (04 )
404361953
9/25/2025 | Courtesy notifications will be sent to all parcel owners with building units within 2,000 feet of the location letting them know about our subsequent well operations and providing contact information for Kerr McGee’s response line and online resources.
|
| Wildlife | Form: (04 )
404361953
9/25/2025 | Eagle Buffer:
This planned location is located within a bald eagle buffer. Operations will need to be completed outside the timing windows of 12/1 – 7/31 (eagle nest) and/or 11/15 – 3/15 (winter night roost). The eagle nest buffer window can be shortened if the nest has been confirmed fledge for the year by CPW. If work, is planned during either window, HSE will consult with CPW prior to operations beginning. CPW CONSULTATION HAS BEEN COMPLETED. |
| Wildlife | Form: (04 )
404361953
9/25/2025 | This location was reviewed using a desktop method to review publicly available wildlife data (including CPW & ECMC data) as well as internal wildlife datasets and aerial imagery. All field personnel are trained to identify wildlife risks and raise concerns noticed during operations with the Kerr McGee's Health, Safety, and Environment (HSE) department. |
| Dust control | Form: (04 )
404361953
9/25/2025 | Water will be placed on dirt access roads to mitigate dust as needed. |
| Noise mitigation | Form: (04 )
404361953
9/25/2025 | Noise associated with pipe handling, traffic, and other operational activity will be minimized between 7:00 pm and 7:00 am. Based off the rig sound signature, rig orientation will be considered to reduce noise levels to nearby building units. |