Skip to Main Content

COGIS DB

 
Facility TypeFacility ID/
API
Facility Name/
Number
Operator Name/
Number
StatusField Name/
Number
LocationLocation IDRelated Facilities
WELL05-123-34794SCHOMBER
13N-22HZ
KERR MCGEE OIL & GAS ONSHORE LP
47120
PA
5/4/2012
WATTENBERG
90750
WELD  123
NWNW 22 2N66W 6
426807View Related
 
COGIS - Conditions of Approval Results
TypeSource DocumentConditions of Approval
EngineerForm: (02)
400221992
11/21/2011
1)Note surface casing setting depth change from 900’ to 910’. Increase cement coverage accordingly and cement to surface. 2)Provide 24 hour notice of MIRU to Jim Precup via e-mail at jim.precup@state.co.us. 3)Comply with Rule 317.i and provide cement coverage from the end of the production casing to a minimum of 200' above the Niobrara and from 200’ below Sussex to 200’ above Sussex. Verify coverage with a cement bond log. 4)Comply with Rule 321. Run and submit Directional Survey from the end of production casing to base of surface casing. Ensure that the wellbore complies with setback requirements in commission orders or rules prior to producing the well.
AgencyForm: (02)
400221992
12/11/2011
Operator must meet Rule 318A water well sampling requirements.
EngineerForm: (06)
400280421
05/30/2012
1) Provide 48 hour notice of MIRU to Mike Hickey at (970) 302-1024. 2) The CBL on file only logged the interval from 6100’ to 6980’. Therefore, no CBL is currently on file to confirm the Sussex coverage required by the approved APD. Run a CBL to verify this Sussex coverage from at least 200’ below to 200’ above Sussex. Submit a copy of the CBL with the Subsequent Report of Abandonment. If this coverage does not exist, perforate the casing and cement the annular space from 50’ below to 50’ above the Sussex formation. If cement coverage does not exist in the annular space outside of the 7” casing across the surface casing shoe plug, this plug shall be placed both within the casing and within the annular space from the depths identified. 3) Surface cement plug must fill the upper 50 feet of the casing and the upper 50 feet of all open annular spaces between casing strings. 4) Operator must provide well location GPS coordinates on Subsequent Report of Abandonment in accordance with COGCC As-Built Location Policy and Rule 215. 5) Provide an “As Plugged” wellbore diagram identifying the specific plugging completed. 6) Leave at least 100’ of cement in the casing for each plug. 7) For the surface casing shoe plug, if not circulated to surface, tag plug and it must be at least 870’ or higher. 8) Properly abandon flowlines as per Rule 1103. 9) Operator must tag plugs upon verbal request by the COGCC engineer or COGCC field inspector. 10) Prior to or in conjunction with the submittal of the Form 6 Subsequent Report of Abandonment, all well production records shall be brought up to date. This includes any periods that the well was shut in or temporary abandoned, as production must be reported from spud to plug even if the well’s production is zero. 11) See plugging changes above.
 
COGIS - Best Management Practice Results
BMP TypeSource DocumentBest Management Practices
Drilling/Completion OperationsForm: (02 )
400221992
12/11/2011
Prior to drilling operations, Operator will perform an anti-collision scan of existing offset wells that have the potential of being within close proximity of the proposed well. This anti-collision scan will include definitive MWD or gyro surveys of the offset wells with included error of uncertainty per survey instrument, and compared against the proposed wellpath with its respective error of uncertainty. If current surveys do not exist for the offset wells, Operator may have gyro surveys conducted to verify bottomhole location. The proposed well will only be drilled if the anti-collision scan results indicate that there is not a risk for collision, or harm to people or the environment.  For the proposed well, upon conclusion of drilling operations, an as-constructed gyro survey will be submitted to COGCC with the Form 5.
Drilling/Completion OperationsForm: (02 )
400221992
12/11/2011
1.    At least seven (7) days prior to fracture stimulation, the operator is to notify all operators of non-operated wells within 300 feet of the wellbore to be fracture stimulated of the anticipated date stimulation date and the recommended best management practice to shut-in all wells within 300’ of the stimulated wellbore completed in the same formation. 2.    The operator will monitor the bradenhead pressure of all wells operated by the operator within 300 feet of the well to be fracture stimulated. 3.    Bradenhead pressure gauges are to be installed 24 hours prior to stimulation. The gauges are to read at least once during every 24-hour period until 24-hours after stimulation is completed (post flowback). The gauges are to be of the type able to read current pressure and record the maximum encountered pressure in a 24-hour period. The gauge is to be reset between each 24-hour period. The pressures are to be recorded and saved. Alternate electronic measurement may be used to record the prescribed pressures. Data shall be kept for a period of one year. 4.    If at any time during stimulation or the 24-hour post-stimulation period, the bradenhead annulus pressure of the treatment well or offset wells increases more than 200 psig, as per Rule 341, the operator of the well being stimulated shall verbally notify the Director as soon as practicable, but no later than twenty-four (24) hours following the incident. Within fifteen (15) days after the occurrence, the operator shall submit a Sundry Notice, Form 4, giving all details, including corrective actions taken.