| Engineer | Form: (02)
400488894
10/08/2013 | 1) Provide 48 hour notice prior to spud via electronic Form 42.
2) If production casing is set provide cement coverage to at least 200’ above the
shallowest completed interval or Lansing-Kansas City, whichever is shallower and
across Cheyenne/Dakota interval (5150’ to 4600’ min). Run and submit CBL verify
cemented intervals.
3) If well is a dry hole set plugs at the following depths: 40 sks cement +/- 50’ above the
Spergen, 40 sks cement +/- 50’ above the Lansing-Kansas City, 40 sks cement across
any DST w/ show, 40 sks cement 100’ below Cheyenne (5150’), 40 sks cement 50’
above top of Dakota (4600’), 50 sks cement from 50’ below surface casing shoe up into
surface casing, 15 sks cement in top of surface casing, cut 4 ft below GL, weld on plate,
5 sks cement each in rat hole and mouse hole. |
| Engineer | Form: (04)
400778681
03/30/2015 | 1) If flaring will continue more than 6 months, submit updated requests to flare to COGCC on Form 4 (Sundry Notice), which discusses timing to connect to sales line, plans to develop infrastructure, and justification for continued venting/flaring.
2) The operator is required to obtain and maintain any required air permits from CDPHE.
3) The venting or flaring volumes shall be reported by Form 7, Operator’s Monthly Report of Operations.
|
| Engineer | Form: (04)
400809276
03/30/2015 | 1) If flaring will continue more than 6 months, submit updated requests to flare to COGCC on Form 4 (Sundry Notice), which discusses timing to connect to sales line, plans to develop infrastructure, and justification for continued venting/flaring.
2) The operator is required to obtain and maintain any required air permits from CDPHE.
3) The venting or flaring volumes shall be reported by Form 7, Operator’s Monthly Report of Operations.
|
| Engineer | Form: (04)
400982422
03/25/2016 | 1) Submit requests to flare annually to COGCC on Form 4 (Sundry Notice), which discusses timing to connect to sales line, plans to develop infrastructure, and justification for continued venting/flaring. Provide gas analysis including H2S with each Sundry Notice.
2) Venting or flaring of natural gas shall comply with COGCC Rule 912.
3) Report flaring volumes on Form 7, Operator’s Monthly Report of Operations.
4) Notify the local emergency dispatch or the local governmental designee of natural gas flaring.
5) The operator is required to obtain and maintain any required air permits from CDPHE. The combustion device must comply with applicable design destruction efficiency for hydrocarbons.
|
| UIC | Form: (02)
401135936
10/24/2016 | Injection is not authorized until approval of Subsequent Forms 31 and 33. |
| UIC | Form: (02)
401135936
10/24/2016 | Operator required to file Form 4 Sundry Notice with all formation tops from surface to at least top of Niobrara as shown on Scout Card. |