<_x0034_04023721>

404023721 02 2024-12-13T10:35:29.077-07:00 10670 BISON IV OPERATING LLC

518 17TH STREET SUITE 1800

DENVER CO 80202 Rachel Milne 720 370-8580 Alison Parker Regulatory Analyst 2024-12-13T10:35:29.077-07:00 2024-12-13T10:35:28.933-07:00 IN PROCESS aparker 2024-12-11T10:29:05.67-07:00 aparker aparker@bisonog.com 9.00000 466299 rmilne@bisonog.com aparker aparker 2024-12-13T10:35:18.193-07:00 404023721 DR N N OIL SINGLE N Fox Creek 12-63 25-1-9 18292 SWSE 25 12N 63W 6 1380 HEREFORD FEL 930 34200 5399 FSL WELD HORIZONTAL 2003 2004 FEL FEE 150 FNL 36 FEE 12N 63W 640 T12N R63W Sec 36: ALL FEL 50 FSL 1 43 11N 63W FEET FEET N N N Y 05 123 50300 00 20230068 ANNULAR PREVENTOR DOUBLE RAM ROTATING HEAD 40.975918 -104.376641 2018-08-20T00:00:00-06:00 2.2 false false false false false false false false false false false false false false FEE 150 FEET 1440 FEET true false false false false false false false false false false false false jvanbramer@bisonog.com false false false N/A true true Approved WOGLA19-0111 Approved 9/4/19 false PDOP false Y 7857 7462 1 11N 63W 150 FSL 2003 FEL 18292 7462 true 2019-09-04T00:00:00-06:00 true false false false false true 7462 false false true 404023721 Distance from completed zone of this wellbore to nearest completed zone of an offset well (maybe take out "within the same unit permitted or completed" in the same formation is to the JAKE 2-01H (05-123-30574) operated by BISON IV OPERATING LLC, this distance was measured via an anticollision. No 408.u is attached as the subject well is operated by BISON IV OPERATING LLC. Distance from the proposed wellbore to nearest existing or proposed wellbore belonging to another operator, including plugged wells was measured to the Bevo 4-36 SWD (05-123-30585) operated by EOG RESOURCES INC, this distance was measured via anticollision. This well has a bottom-hole location beyond the unit boundary setback. The bottom of the completed interval will be within the unit boundary setback at 150’ FSL and 2003’ FEL of Section 1. The wellbore beyond the unit boundary setback will be physically isolated and will not be completed. This Form 2 is being submitted as an amended permit. The SHL, TPZ, BPZ, and BHL, drill plan, and name is changing from the original Form 2. 404023721 404023721 FORM 2 SUBMITTED 404023721.pdf 404023721 404023791 WELL LOCATION PLAT FOX CREEK 12-63 25-1-9 - WELL LOCATION PLAT - 20241120.pdf 896232 404023721 404027728 OffsetWellEvaluations Data FOX CREEK 25 SE OffsetWellEvaluations JVB - 20241120.xlsx 33840 404023721 404027734 OTHER AC REPORT #1 - FOX CREEK 12-63 25-1-9.pdf 832004 404023721 404027739 DEVIATED DRILLING PLAN PROPOSAL #1 - FOX CREEK 12-63 25-1-9.pdf 258651 404023721 404027766 DIRECTIONAL DATA PROPOSAL #1 - FOX CREEK 12-63 25-1-9 (COGCC).xlsx 25638 404023721 401905333 02A 861d6c72-a6b5-490b-9e91-0ddbdb7b74ce 404023721 3 Drilling/Completion Operations Alternative Logging Program - One of the first wells drilled on the pad will be logged with Open Hole Resistivity Log and Gamma Ray Log from the kick-off point to into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on production casing (or on intermediate casing if production liner is run) into the surface casing. The horizontal portion of every well will be logged with a measured-while-drilling gamma-ray log. The Form 5, Completion Report, for each well on the pad will list all logs run and have those logs attached. The Form 5 for a well without open-hole logs shall clearly state "Alternative Logging Program - No open-hole logs were run" and shall clearly identify (by API#, well name & number) the well in which open-hole logs were run. false e2bc8d82-7033-48e5-970d-8072226441e1 404023721 2 Drilling/Completion Operations Anti-collision: Operator will perform an anti-collision evaluation of all active (producing, shut in, or temporarily abandoned) offset wellbores that have the potential of being within 150 feet of a proposed well prior to drilling operations for the proposed well. Notice shall be given to all offset operators prior to drilling. false 2b4f0db2-8cbb-453d-b5b5-eb9aded724a3 404023721 4 Drilling/Completion Operations When a skid is performed, if a previous well on that pad has completed a full BOPE test within the past 21 days, then the only required BOPE tests are for the BOPE connections that were broken during skid. The purpose of this is to prevent the wear and tear on the choke line and kill line values. The annular and double rams will be tested as per usual, and all broken connections will also be tested (annular to 70% of rated pressure, all other values and connections will be tested to full rated pressure). Under no circumstances will 21 days be exceeded without completing a full BOPE Test to all connections including all choke and kill line valves. Daily function test/activation of pipe rams are still required in addition to a preventer operator test on each trip. false 0e5ccfe3-2c9c-485d-88cf-162a0a4b9a83 404023721 1 Drilling/Completion Operations Blowout Prevention Equipment ("BOPE"): A double ram annular preventer will be used during drilling. false 404023721 1ST 8 1 2 5 1 2 20 18292 1988 18292 1700 0 PLANNED HCP110 false false false 404023721 CONDUCTOR 26 16 37 80 50 80 0 0 PLANNED N/A false false false 404023721 SURF 13 1 2 9 5 8 36 1900 787 1900 0 0 PLANNED J55 false false false 404023721 NIOBRARA NBRR 421-121 1280 T12N R63W Sec 36: ALL; T11 R63W Sec 1; ALL Thread was being aborted.