<_x0034_02191632>

402191632 02 2019-11-26T14:39:31.537-07:00 26580 BURLINGTON RESOURCES OIL & GAS LP

925 N ELDRIDGE PARKWAY

HOUSTON TX 77079 LARRY SMITH 832 486-2590 918 662-8057 LARRY SMITH Regulatory Coordinator 2019-11-26T14:39:31.537-07:00 2019-11-26T14:39:31.49-07:00 UPLOADED lsmith 2019-09-27T12:32:18.603-06:00 lsmith LARRY.R.SMITH@CONOCOPHILLIPS.COM 6.00000 false LARRY.R.SMITH@CONOCOPHILLIPS.COM acksa acksa 2019-11-27T10:44:48.307-07:00 402191632 DR N N OIL SINGLE N GRANDE 4-65 20-19 2DH 18583 NWNW 21 4S 65W 6 866 WILDCAT FWL 984 99999 5664 FNL ARAPAHOE HORIZONTAL 460 325 FEL FEE 2482 FNL 20 FEE 4S 65W 640 Section 19 (all), T4S, R65W FWL 2482 0 FNL 19 317 4S 65W FEET FEET N N N Y OFFSITE Recycle/reuse Commercial Disposal facility for freshwater used to drill surface section. Oil Based Mud used for remainder of lateral drilled will be reused from pad to pad. 19920030 ANNULAR PREVENTOR DOUBLE RAM ROTATING HEAD 39.693855 -104.675338 2018-08-24T00:00:00-06:00 CHAD MEIERS 1.8 true false true false false false false false false false false true true true false FEE false Surface Use Agreement 460 FEET 6 section DSU described below contains T4S-R65W-17,18,19,20,29,30 and has been approved. FEET true 609 OFFSITE Commercial Disposal false false false false false false false false false false false Adam Mullins, Adam.Mullins@conocophillips.com false true false Aurora Municipality true true In Process Anticipated approval of local permit December 2019. false OIL AND GAS WELL PERMIT 2019-08-26T00:00:00-06:00 402191632 TPZ directional footages are an estimate based on the proposed landing point of the Horizontal Wellbore. Actual TPZ directional footage will be reported with the Form 5A after completion of the wellbore. This well has a bottom-hole location beyond the unit boundary setback. The bottom of the completed interval will be within the unit boundary setback at 2482' FNL and 460’ FWL of Section 19. The wellbore beyond the unit boundary setback will be physically isolated and will not be completed. Lease Map attached to outline extent of approved 6-section DSU. The nearest well in the formation is the Grande 4-65 20-19 2CH (Doc # 402191626). The distance of 317' was measured in 2D. 402191632 402191632 FORM 2 SUBMITTED 402191632.pdf 402191632 402249286 OffsetWellEvaluations Data Grande North (1AH-2DH) OWE Final 10-24-19.xlsx 48347 402191632 402249288 DIRECTIONAL DATA Grande 4-65 20-19 2DH_Design A_COGCC.xlsm 30861 402191632 402249290 SURFACE AGRMT/SURETY Condensed Parklands SUA_FINAL.pdf 2271215 402191632 402249296 WELL LOCATION PLAT GRANDE 4-65 20-19 2DH WELL LOCATION PLAT.pdf 795559 402191632 402249299 DEVIATED DRILLING PLAN Letter Plot_Grande 4-65 20-19 2DH_Design A.pdf 34899 402191632 402249300 LEASE MAP rbu_nio_spacing_id_ex1_p_190600412.pdf 293136 402191632 402249301 DEVIATED DRILLING PLAN Wellplan Report_Grande 4-65 20-19 2DH_Design A.pdf 81311 402191632 402156151 02A Grande 4-65 20-19 1AH 981cbd09-aa97-457a-ba24-c8e02ad89f08 402191632 1 Drilling/Completion Operations Surface casing setting depth planned a minimum of 200' below the base of the Fox Hills formation. false ab323b2a-1482-42f8-b066-5e6c76b0896e 402191632 2 Drilling/Completion Operations Alternative Logging Program- One of the first wells drilled on the pad will be logged with Open-hole Resistivity Log and Gamma Ray Log will be run from the kick-off point into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on production casing (or on intermediate casing if production liner is run) into the surface casing. The horizontal portion of the wellbore will be logged with a measured-while-drilling gamma-ray log. The Form 5, Completion Report, for each well on the pad will list all logs run and have those logs attached. The Form 5 for a well without open-hole logs shall clearly state "Alternative Logging Program- No open-hole logs were run" and shall clearly identify (by API#, well name & number) the well in which open-hole logs were run. false a2837816-6387-4d39-86f4-6cb742a86251 402191632 3 Drilling/Completion Operations If a skid is performed for the subject well, then the only required BOPE tests will be for any broken BOPE connections, as long as a full BOPE test was performed at the beginning of the pad, and as long as all necessary BOPE tests are completed at least every 21 days during the pad operations. false 402191632 1ST 8 1 2 5 1 2 23 18583 2510 18583 2199 0 PLANNED 402191632 CONDUCTOR 24 16 65 100 100 0 0 PLANNED 402191632 SURF 13 1 2 9 5 8 36 2199 710 2199 0 0 PLANNED 402191632 NIOBRARA NBRR 535-1167 3840 S. 17,18,19,20,29,30 Thread was being aborted.