<_x0034_02098683>

402098683 02A 2019-10-16T10:28:54.143-06:00 10651 VERDAD RESOURCES LLC

5950 CEDAR SPRINGS ROAD

DALLAS TX 75235 Heather Mitchell 720 845-6917 Heather Mitchell Regulatory Manager 2019-10-16T10:28:54.143-06:00 2019-10-22T15:03:20.273-06:00 UPLOADED jberghorn 2019-07-08T12:35:35.18-06:00 jberghorn regulatory@verdadoil.com 10.00000 regulatory@verdadoil.com christob christob 2019-10-25T13:55:57.583-06:00 2 402098683 true true false false false false 02N-63-19 KBL WELD NWSE 19 2N 63W 6 4863 1807 FSL 2096 FEL 40.121608 -104.478337 1.4 2019-06-15T00:00:00-06:00 Preston Knutsen 12 0 0 0 0 7 0 10 12 0 0 1 0 0 0 0 0 0 0 0 4 The majority of flowlines will be Schedule 80 FBE welded steel including: (12) 3" flowlines from the wellheads to the separators, (12) 3" gas injection lines from the compressor to the wellheads, (12) 2" dump lines from the separators to the tanks, and (12) 1" gas supply lines from the wellheads to the separators. Poly will be utilized to supply gas to the tubing motor valves, including (12) 1" lines from the separators to the motor valves on the wellheads. Gas gatherers are near the proposed pad and Verdad will work with the appropiate parties to ensure a timely gas gathering connection. 2019-10-01T00:00:00-06:00 2020-04-01T00:00:00-06:00 4863 true false false OFFSITE Commercial Disposal 2019-04-24T00:00:00-06:00 FEE FEE false false false false Surface Use Agreement true 20170009 false false false true false true 44—Olney loamy sand, 1 to 3 percent slopes 49—Osgood sand, 0 to 3 percent slopes 70—Valent sand, 3 to 9 percent slopes false true false true false false false false false false true 1983 949 320 false false No false false 13.35 5.36 2 0 0 1 true OFFSITE Commercial Disposal false true The closest well shown on the COGCC and Hydrology Map is owned by Linda Schneider (Permit #269226, Receipt# 3604289) at a distance of 949 feet from the proposed location. The static water level of the well is 320 feet with an overall total well depth of 716 feet. 318A false false false false false false false false false NO true true false false false false false false false false false false N/A County false false Waived Weld county 1041 WOGLA hearing 11/14/2019 1041 WOGLA 2019-09-26T00:00:00-06:00 402098683 The KBL 1918-06H is the reference well used for the location identification. The distances for the cultural setbacks were provided from the nearest proposed well and production facility on the pad. Verdad will provide a land application Facility # or beneficial resuse ID prior to drilling and disposal of water based cuttings or fluids via a From 4 Sundry. Rule 306 consultation was waived by surface owner - please see section 8 on page 3 of attached surface use agreement. 402098683 402098683 FORM 2A RESUBMITTED 402098683.pdf 402098683 402204783 FORM 2A REJECTED 402204783.pdf 402098683 402205360 WASTE MANAGEMENT PLAN VR WMP 10.09.19.pdf 56049 402098683 402210883 ACCESS ROAD MAP KBL 02N-63W-19_ACCESS_ROAD_MAP_HAUL_ROUTE_REV_20190911.pdf 879510 402098683 402210885 HYDROLOGY MAP KBL 02N-63W-19_HYDROLOGY_MAP_20190705.pdf 609250 402098683 402210891 LOCATION DRAWING KBL 02N-63W-19_LOCATION_DRAWING_REV_20191015.pdf 691862 402098683 402210892 LOCATION PICTURES KBL 02N-63W-19_WELL_PAD_LOCATION_PICTURES_REV_20191015.pdf 967895 402098683 402210897 MULTI-WELL PLAN KBL 02N-63W-19_MULTI-WELL_PLAN_20190626.pdf 155643 402098683 402210900 REFERENCE AREA MAP KBL 02N-63W-19_REFERENCE_AREA_MAP_20190705.pdf 517469 402098683 402210904 REFERENCE AREA PICTURES KBL 02N-63W-19_REFERENCE_AREA_PICTURES_20190705.pdf 721045 402098683 402210906 NRCS MAP UNIT DESC NRCS Map.pdf 253672 402098683 402217642 SURFACE AGRMT/SURETY Kauffman Bros Ltd Prtnrshp -Memo of SUA 19-2-63 - Fully Executed.pdf 101811 402098683 402098569 02 KBL 1918-01H 402098683 402098602 02 KBL 1918-02H 402098683 402098606 02 KBL 1918-03H 402098683 402098613 02 KBL 1918-04H 402098683 402098616 02 KBL 1918-05H 402098683 402098625 02 KBL 1918-06H 402098683 402098635 02 KBL 1930-07H 402098683 402098652 02 KBL 1930-08H 402098683 402098655 02 KBL 1930-09H 402098683 402098660 02 KBL 1930-10H 402098683 402098669 02 KBL 1930-11H 402098683 402098674 02 KBL 1930-12H a26a6ef5-421a-4609-b558-2cfd0c68b32e 402098683 1 Planning Verdad has submitted a WOGLA application with Weld county that addresses site safety and contains an emergency action and tactical response plan. Each location is assigned a physical address for emergency responders to locate the site in the event of an emergency. false 22bae81b-38fb-4b7d-9724-31869114f2de 402098683 16 Emissions mitigation AVO (Audio, Visual, Olfactory) inspections of pipe and connections will be performed daily on production equipment to detect leaks which will be immediately corrected, repaired and reported to COGCC as required. false 08413dd7-6040-4fd1-b48a-38fad2985ab0 402098683 2 General Housekeeping Cleanup of trash, scrap, and discarded materials will be conducted at the end of each workday. false 5cd4bcf4-87d9-402f-b035-4d4559c49ad2 402098683 10 Material Handling and Spill Prevention Verdad wells have remote shut-in capabilities to mitigate spills and safety issues. Remote shut-in will allow Verdad to immediately shut a well in the event of a reported problem on location or in the event of a potential threat such as a grass fire or flood. false 58997116-a44e-4b4e-8406-832252148808 402098683 8 Material Handling and Spill Prevention Separators are encompassed by steel berms and surrounded road base that is approximately 1-2 feet and it is sufficiently impervious per SPCC regulation to greatly minimize impact to the soil from any potential leak or drip from the separators. Sites are visited daily so a spill would be detected and cleaned up before any significant infiltration could occur. The berms would contain a spill from leaving the area around the separators. false d1022eb5-d988-4f57-830d-9376a586e7bb 402098683 9 Material Handling and Spill Prevention To minimize potential impacts to soil, the operator shall line the secondary containment areas for the tanks with an impervious poly or spray in liner. false d4845f57-f1e0-422c-838b-96d01c66a305 402098683 11 Dust control To prevent dust from becoming a nuisance to the public, water trucks will be utilized to spread water across any dust problem areas. false 8a85c655-3864-4fea-8e6f-9b8660fcbe5d 402098683 6 Material Handling and Spill Prevention Containment will be used during fueling of equipment to contain spills and leaks all phases of operations. Spill prevention Control Countermeasure (SPCC) will be in place to address any spills associated with oil and gas operations. Tank secondary containment will be impervious lined steel berms with capacity > 150% volume of the largest tank. Pad will also have tertiary containment of ditch and berm to prevent any spills from leaving site. Any spills will be immediately cleaned up and reported if volume exceeds reporting limit. false 134b4922-6770-4450-99da-9e133f75b72e 402098683 12 Construction MLVT Size is 120’DX14’H and the volume is 25,000 BBLS. Vendor/Manufacture will be Select Energy Services. It will be on location for 45 days during completion operations. Verdad will follow the COGCC guidance policy dated June 13, 2014 on the use of MLVTs. false 491d7119-00ff-4953-8bf1-b3980bba3824 402098683 13 Noise mitigation Operator will consult with owners of residents and occupied structures and other stakeholders to reduce impact of noise and light during drilling and completion operations. The direction of prevailing winds is considered when planning the location in order to mitigate odor and noise from being a nuisance to the surrounding residents and occupied structures. In order to minimize sound levels during drilling operations at nearby residences, rig generators will be located as far as possible from the residence by rig orientation. Rig lighting will also be directed away from residential units. false eaeabeef-f176-4220-b0d6-b3aebde06d06 402098683 15 Emissions mitigation Test separators and associated flow lines, sand traps and emission control systems shall be installed on-site to accommodate green completions techniques. When commercial quantities of salable quality gas are achieved at each well, the gas shall be immediately directed to a sales line or shut in and conserved. If a sales line is unavailable or other conditions prevent placing the gas into a sales line, the operator shall not produce the wells without an approved variance per Rule 805.b.(3)C. false ea04caf8-f9da-4b66-b3db-d44984034839 402098683 18 Odor mitigation To reduce odors during drilling and completion, the rig will be washed of oily debris before moving in. D822 is our base fluid which is a distillate and has the benefits of lower BTEX levels and is recognized as having lower odor than traditional oil based mud. We will utilize drying shakers which will minimize residual oil on cuttings prior to transport and will promptly remove 4-5 loads of cuttings per day during drilling operations which should help to reduce odors. false 58b8d477-ba68-481f-b776-d5ec23f95529 402098683 3 General Housekeeping Mud control: Operator will implement effective, temporary vehicle tracking control at the location egress to prevent transport of sediment offsite and onto the public road during construction, drilling, completions, stimulation, and flowback operations. Appropriate vehicle tracking control, such as a properly sized cattle guard, will still be required during production operations. false 34f99d97-0415-4974-b596-d87d60fb8070 402098683 5 Material Handling and Spill Prevention During drilling operations, we anticipate 4-5 loads, @ 20 yards per load, of cuttings pe rday will be transported off-site to an approved disposal facility in accordance with Operator’s waste management plan. All loads leaving the location will have a manifest and will be documented. Water-based and Oil-based cuttings will be disposed of offsite and at a licensed, commercial disposal site. No cuttings will be stored on location. false 64984a6e-fbbd-429c-a785-df0199ee3ecc 402098683 14 Noise mitigation Temporary straw bale walls or sound walls will be constructed and the utilization of “quiet” frac/axillary equipment will be constructed and utilized to dampen noise in the direction of residential units false b85c6612-d125-4244-8b66-e069fe7f58ef 402098683 4 Storm Water/Erosion Control Stormwater management plans (SWMP) will be in place to address construction, drilling, and operations associated with CDPHE permits. The location will have stormwater control measures consisting of a berm around the perimeter of the location to divert clean water away from disturbed areas and to divert onsite runoff into a sediment trap, a ditch around the location to collect and divert runoff to a sediment trap, and two to four sediment traps to allow sediment to settle out of diverted stormwater runoff. Sediment trap spill way will use rip-rap, aggregate and/or wattles to further filter runoff. These control measures will be inspected at the following frequencies: or 2-inch to 4-inch stone Every 14 days during construction, drilling and completions. Once per month after that, until interim reclamation is completely established (approximately 2 years). Once per year after that until facility abandoned false 69c9755e-07f5-4cad-8625-874b6366ee77 402098683 7 Material Handling and Spill Prevention During drilling operations 12 inches of cement is placed under the rig surrounded by a compacted soil berm to prevent any soil contamination. Drilling mud is stored in large volume tanks that will be surrounded by impervious secondary containment. false 83ac307a-7201-4ef4-913c-edfaf14f35d7 402098683 17 Emissions mitigation Verdad will employ automated tank gauges to allow for the gauging of liquids without opening the thief hatch. This will minimize the number of times a thief hatch will be opened and further reduce the vapor emissions from tank. false 402098683 Kauffman Brothers Lp

8616 County Rd 63

Keenesburg CO 80643 402098683 12 0 0 0 0 7 0 10 12 0 0 1 0 0 0 0 0 0 0 0 4 The majority of flowlines will be Schedule 80 FBE welded steel including: (12) 3" flowlines from the wellheads to the separators, (12) 3" gas injection lines from the compressor to the wellheads, (12) 2" dump lines from the separators to the tanks, and (12) 1" gas supply lines from the wellheads to the separators. Poly will be utilized to supply gas to the tubing motor valves, including (12) 1" lines from the separators to the motor valves on the wellheads. Gas gatherers are near the proposed pad and Verdad will work with the appropiate parties to ensure a timely gas gathering connection. 2 0 0 1 402098683 C false true 402098683 F false true 402098683 false true false false false false false false Thread was being aborted.