<_x0034_01601637>

401601637 02A 2019-07-15T09:53:41.04-06:00 10651 VERDAD RESOURCES LLC

5950 CEDAR SPRINGS ROAD

DALLAS TX 75235 Heather Mitchell 720 845-6917 Heather Mitchell Regulatory Manager 2019-07-15T09:53:41.04-06:00 2019-07-15T09:53:40.96-06:00 UPLOADED jen 2018-04-10T09:46:56.61-06:00 jen REGULATORY@VERDADOIL.COM 9.00000 REGULATORY@VERDADOIL.COM espino-e espino-e 2019-07-16T09:52:11.43-06:00 2 401601637 true true false false false false 1717 TIMBRO WELD NENE 17 9N 59W 6 5010 306 FNL 987 FEL 40.756951 -103.996171 1.5 2018-03-20T00:00:00-06:00 Brent Garcia 7 14 7 7 1 4 The majority of flowlines will be Schedule 80 FBE welded steel including: (7) 3” flowlines from the wellheads to the separators, (7) 3” gas injection lines from the compressor to the wellheads, (7) 2” dump lines from the separators to the tanks, and (7) 1” gas supply lines from the wellheads to the separators. Poly will be utilized to supply gas to the tubing motor valves, including (7) 1” lines from the separators to the motor valves on the wellheads. 2020-04-01T00:00:00-06:00 2020-10-01T00:00:00-06:00 5010 true false false OFFSITE Commercial Disposal 2018-03-19T00:00:00-06:00 FEE FEE false false false false Surface Use Agreement true 20170009 false false true true 41 Nunn clay loam, 0 to 6 percent slopes 46 Otero sandy loam, 0 to 3 percent slopes false false true 2018-03-20T00:00:00-06:00 true true false false false false false false false 2106 2037 1800 false false No false 6.20 4.30 2 1 true OFFSITE Commercial Disposal false true The closest well shown on the COGCC interactive Map and hydrology map is owned by Ronald Timmerman (Permit# 296103, Receipt# 3667072A) at a distance of 2037 feet from the proposed pad. The overall depth of the well according to the permit is 1800 feet. 609 false false false false false false false false false NO true true false false false false false false false false false false N/A County false false Waived WOGLA was submitted 06/05/2019 401601637 The Timbro 1717-08H is the reference well used for the location identification. The distances for the cultural setbacks were provided from the nearest proposed well and production facility on the pad. Verdad will provide a land application Facility # or beneficial reuse ID prior to drilling and disposal of water based cuttings or fluids via a Form 4 Sundry. Please note the facility layout is included on the "Location Drawing" attachment. VOC combustors listed as ECDs on the location drawing. 401601637 401601637 FORM 2A RESUBMITTED 401601637.pdf 401601637 402092621 FORM 2A REJECTED 402092621.pdf 401601637 402093735 LOCATION DRAWING LO_TIMBRO_1717_LOC_DRAWING_REV3.pdf 3836082 401601637 402093763 HYDROLOGY MAP F2A_TIMBRO_1717_HYDRO.PDF 1020184 401601637 402093764 SURFACE AGRMT/SURETY SUA-Timbro 1717 Executed.pdf 720341 401601637 402093781 REFERENCE AREA PICTURES F2A_TIMBRO_1717_REF_PHOTOS.PDF 1195617 401601637 402093787 REFERENCE AREA MAP F2A_TIMBRO_1717_REF.PDF 1012306 401601637 402093788 ACCESS ROAD MAP F2A_TIMBRO_1717_ACCESS.PDF 5518020 401601637 402093798 NRCS MAP UNIT DESC F2A_TIMBRO_1717_NRCS.pdf 791382 401601637 402093810 LOCATION PICTURES F2A_TIMBRO_1717_PHOTOS.PDF 949842 401601637 402094228 MULTI-WELL PLAN Timbro 1717 multi well plan.pdf 316853 401601637 401601649 02 TIMBRO 1717-08H FORM 2 401601637 401601657 02 TIMBRO 1717-09H FORM 2 401601637 401601669 02 TIMBRO 1717-10H FORM 2 401601637 401601675 02 TIMBRO 1717-11H FORM 2 401601637 401601684 02 TIMBRO 1717-12H FORM 2 401601637 401601695 02 TIMBRO 1717-13H FORM 2 401601637 401601704 02 TIMBRO 1717-14H FORM 2 dd9159d7-df93-4147-a85f-27218104d24c 401601637 3 General Housekeeping Mud control: Operator will implement effective, temporary vehicle tracking control at the location egress to prevent transport of sediment offsite and onto the public road during construction, drilling, completions, stimulation, and flowback operations. Appropriate vehicle tracking control, such as a properly sized cattle guard, will still be required during production operations. false 4f228741-0f06-467f-a868-3e3812aa5ebe 401601637 6 Material Handling and Spill Prevention Containment will be used during fueling of equipment to contain spills and leaks all phases of operations. Spill prevention Control Countermeasure (SPCC) will be in place to address any spills associated with oil and gas operations. Tank secondary containment will be impervious lined steel berms with capacity > 150% volume of the largest tank. Pad will also have tertiary containment of ditch and berm to prevent any spills from leaving site. All spills will be immediately cleaned up and will be reported if volume exceeds reporting limit. false d4a1a9a8-5817-46e7-9687-594eac4b0dc7 401601637 10 Emissions mitigation Test separators and associated flow lines, sand traps and emission control systems shall be installed on-site to accommodate green completions techniques. When commercial quantities of salable quality gas are achieved at each well, the gas shall be immediately directed to a sales line or shut in and conserved. If a sales line is unavailable or other conditions prevent placing the gas into a sales line, the operator shall not produce the wells without an approved variance per Rule 805.b.(3)C. false 286f376c-e6c5-4a58-81a5-67d65303f61b 401601637 2 General Housekeeping Cleanup of trash, scrap, and discarded materials will be conducted at the end of each workday. false 259f28ec-1aea-4d64-a85b-6ba8d8c2ef73 401601637 7 Dust control To prevent dust from becoming a nuisance to the public, water trucks will be utilized to spread water across any dust problem areas. false 2db049d5-9504-4140-b211-81d6367e13db 401601637 5 Material Handling and Spill Prevention During drilling operations, we anticipate 4-5 loads, @ 20 yards per load, of cuttings pe rday will be transported off-site to an approved disposal facility in accordance with Operator’s waste management plan. All loads leaving the location will have a manifest and will be documented. Water-based and Oil-based cuttings will be disposed of offsite and at a licensed, commercial disposal site. No cuttings will be stored on location. false 0acf19e8-baf2-4233-9d0e-8bc2d25d6811 401601637 11 Emissions mitigation AVO (Audio, Visual, Olfactory) inspections of pipe and connections will be performed daily on production equipment to detect leaks which will be immediately corrected, repaired and reported to COGCC as required. false 7f3bfeb2-24f3-423e-b4dd-99ac7896e91b 401601637 8 Construction MLVT Size is 120’DX14’H and the volume is 25,000 BBLS. Vendor/Manufacture will be Select Energy Services. It will be on location for 45 days during completion operations. Verdad will follow the COGCC guidance policy dated June 13, 2014 on the use of MLVTs. false 324eb4cb-4464-474d-812e-c7d2b12913fd 401601637 12 Odor mitigation To reduce odors during drilling and completion, the rig will be washed of oily debris before moving in. D822 is our base fluid which is a distillate and has the benefits of lower BTEX levels and is recognized as having lower odor than traditional oil based mud. We will utilize drying shakers which will minimize residual oil on cuttings prior to transport and will promptly remove 4-5 loads of cuttings per day during drilling operations which should help to reduce odors. false dc32eab5-c7b1-4f2c-9589-da01bdf045b0 401601637 4 Storm Water/Erosion Control Stormwater management plans (SWMP) will be in place to address construction, drilling, and operations associated with CDPHE permits. BMPs for stormwater will be implemented around the perimeter of the pad prior to or during construction and will vary according to the location. These BMPs will remain in place and maintained throughout operations until final reclamation. false ce45a302-89c6-4b55-8e25-e43c6a4b81e1 401601637 1 Planning Verdad has submitted a WOGLA application with Weld county that addresses site safety and contains an emergency action and tactical response plan. Each location is assigned a physical address for emergency responders to locate the site in the event of an emergency. false 3d26d6b3-a1e4-47b4-ab14-0219badae506 401601637 9 Noise mitigation Operator will consult with owners of residents and occupied structures and other stakeholders to reduce impact of noise and light during drilling and completion operations. The direction of prevailing winds is considered when planning the location in order to mitigate odor and noise from being a nuisance to the surrounding residents and occupied structures. In order to minimize sound levels during drilling operations at nearby residences, rig generators will be located as far as possible from the residence by rig orientation. Rig lighting will also be directed away from residential units. false 401601637 TIMBRO RANCH & CATTLE CO

5566 S SYCAMORE ST

LITTLETON CO 80120 401601637 7 14 7 7 1 4 The majority of flowlines will be Schedule 80 FBE welded steel including: (7) 3” flowlines from the wellheads to the separators, (7) 3” gas injection lines from the compressor to the wellheads, (7) 2” dump lines from the separators to the tanks, and (7) 1” gas supply lines from the wellheads to the separators. Poly will be utilized to supply gas to the tubing motor valves, including (7) 1” lines from the separators to the motor valves on the wellheads. 2 1 401601637 C true 401601637 F true 401601637 true true false false false false false false Thread was being aborted.