<_x0034_01279058>

401279058 02A 2017-07-14T11:05:50.687-06:00 10459 EXTRACTION OIL & GAS INC

370 17TH STREET SUITE 5300

DENVER CO 80202 Alyssa Andrews 720 481-2379 Alyssa Andrews Regulatory Analyst 2017-07-14T11:05:50.687-06:00 2017-07-14T11:05:49.233-06:00 UPLOADED ANDREWSA 2017-05-09T16:42:49.427-06:00 ANDREWSA aandrews@extractionog.com 6.00000 aandrews@extractionog.com schwarzs schwarzs 2017-07-21T08:59:21.293-06:00 401279058 true true false false false false 7-L Trott WELD NESE 7 4N 68W 6 5034 1547 FSL 984 FEL 40.324431 -105.040427 1.2 2017-04-05T00:00:00-06:00 A. Rivera 24 12 2 29 1 3 Extraction will trench flowlines in one piping corridor that runs between the drill pad and the separator pad and be placed at 12” centers. These lines will most likely be 2” or 3” fusion bonded SCH160 steel pipe and have proper cathodic protection throughout the run. Extraction will then sweep up with a long radius that will tie off each line to the appropriate separator. All welds on these are 100% x-ray and hydro tested to the API and Manufactures specs for a class 1500 series flange. Also meets ASME code B31.4. 2017-09-01T00:00:00-06:00 2017-12-01T00:00:00-07:00 5034 true false false OFFSITE Commercial Disposal FEE FEE true true true false oil and gas lease true 20130028 true true 16—Colby loam, 3 to 5 percent slopes 82—Wiley-Colby complex, 1 to 3 percent slopes false false false false false false false false false true 0 1383 12 false false No false 12.07 6.04 1 true OFFSITE Commercial Disposal true Distance to water feature: 0' to the ditch going through the pad. Distance to water well: Permit #244774, 1383' N Depth to ground water: Permit #214375, 3189' NE 318A false false false false false false false false false NO false true true false false false false false false false false 401279058 MLVT Information: Manufacturer: Hydrologistics Time: 3 months Size/volume - 157' diameter/42,000 bbl 401279058 401279058 FORM 2A SUBMITTED 401279058.pdf 401279058 401304685 NRCS MAP UNIT DESC 20170607_16221304376_170_Map_Unit_Description_Colby_loam_3_to_5_percent_slopes--Weld_County_Colorado_Southern_Part.pdf 119869 401279058 401304686 NRCS MAP UNIT DESC 20170607_16223504779_1_Map_Unit_Description_Wiley-Colby_complex_1_to_3_percent_slopes--Weld_County_Colorado_Southern_Part.pdf 123123 401279058 401304692 LOCATION PICTURES TROTT 7-L PAD 4N68W7 Location Photos.pdf 675366 401279058 401304693 MULTI-WELL PLAN Trott 7-L Pad 4N68W7 Multi Well Plan.pdf 313723 401279058 401315132 FACILITY LAYOUT DRAWING TROTT 7-L PAD 4N68W7 Facility Layout Drawing.pdf 489569 401279058 401315133 HYDROLOGY MAP TROTT 7-L PAD 4N68W7 Hydrology Map.pdf 935883 401279058 401315136 PRE-APPLICATION NOTIFICATION CERTIFICATION TROTT 7-L PAD 4N68W7 Notification Zone Drawing.pdf 730210 401279058 401315139 PRE-APPLICATION NOTIFICATION CERTIFICATION Trott Buffer Zone Certification 305a(2).pdf 86777 401279058 401315140 PRE-APPLICATION NOTIFICATION CERTIFICATION TROTT PROOF OF RECEIPT.pdf 236990 401279058 401338626 ACCESS ROAD MAP TROTT 7-L PAD 4N68W7 Access Road Map.pdf 1195446 401279058 401338628 LOCATION DRAWING TROTT 7-L PAD 4N68W7 Location Drawing.pdf 717358 401279058 401342153 WASTE MANAGEMENT PLAN WMP 2017-04-17.pdf 120992 401279058 401342176 SITING RATIONALE Trott Pad Justification 6-12-17.pdf 83032 401279058 401198397 02 Trott 8E-10-1C 401279058 401198404 02 Trott 7W-10-2C 401279058 401198408 02 Trott 8E-10-3N 401279058 401198428 02 Trott 7W-10-4N 401279058 401198447 02 Trott 8E-10-5N 401279058 401198466 02 Trott 7W-10-6N 401279058 401198474 02 Trott 8E-10-7C 401279058 401198481 02 Trott 7W-10-8N 401279058 401198496 02 Trott 8E-10-9N 401279058 401198501 02 Trott 7W-10-10C 401279058 401198571 02 Trott 8E-10-11N 401279058 401198599 02 Trott 7W-10-12N 401279058 401198608 02 Trott 8E-10-13N 401279058 401198616 02 Trott 7W-10-14N 401279058 401198626 02 Trott 8E-10-15C 401279058 401198645 02 Trott 7W-10-16N 401279058 401198657 02 Trott 8E-10-17N 401279058 401276831 02 Trott 17E-10-19N 401279058 401279039 02 Berthoud Farms 8E-10-5C 401279058 401279043 02 Berthoud Farms 8E-10-7N 401279058 401279046 02 Berthoud Farms 8E-10-9N 401279058 401279053 02 Berthoud Farms 8E-10-11N 622950aa-5c84-4006-afce-0138363ffde8 401279058 37 Drilling/Completion Operations Tanks will be filled using a local water source through temporary waterlines. No water will be trucked to location. false 34470598-5ce2-44d1-958c-0318d0336678 401279058 18 Noise mitigation 604.c.(2)A. During drilling and completions, temporary sound walls and/or haybales will be used where necessary around the pad as a noise mitigation measure for the surrounding homes. Additionally a baseline sound study and model are completed on a site specific basis. Sound walls are placed in the best and most applicable edges of the pad. false 28cf4be5-3f2d-4205-a71e-05b26fee267f 401279058 1 Planning 604.c(2)M. Fencing: A meeting with the surface owner will determine a fencing plan. The location will be adequately fenced to restrict access by unauthorized persons. false e0577bda-9da1-4919-a11d-09539c28232e 401279058 29 Drilling/Completion Operations All liner seams will be welded and tested in accordance with applicable ASTM International standards. false 88756dba-69ca-4130-b032-102c7a5c2fe9 401279058 33 Drilling/Completion Operations The MLVT will be operated with a minimum of 1 foot of freeboard at all times. false 795e4871-a8fc-4dce-8571-1a8b0e1b48f2 401279058 10 Storm Water/Erosion Control Implement and maintain BMPs to control stormwater runoff in a manner that minimizes erosion, transport of sediment offsite, and site degradation. Co-locate flowlines and/or gathering lines whenever feasible, and mitigate any erosion problems that arise due to the construction of any pipeline(s). Location will be covered under Extraction Oil & Gas’s field wide permit, permit number COR03M013. Typical stormwater BMPs installed include a diversion ditch and berm with sediment traps and installation of wattles where necessary. false 69127621-91cd-40b5-a02f-505e8ff3e2a0 401279058 5 Traffic control 604.c.(2)S. Access Roads: The access road will be constructed to accommodate local emergency vehicles. This road will be maintained for access at all times. Traffic will be routed to minimize local interruption. During construction and through the life of this location, Operator will utilize watering, via water trucks, to control fugitive dust. Additionally, the access road will be constructed with aggregate road base material and vehicle speeds will be limited to ten miles per hour to reduce dust. false 94570348-e339-4426-a0e2-3f6ebacecb2f 401279058 28 Drilling/Completion Operations The MLVT will be at least 75 feet from a wellhead, fired vessel, heater-treater, or a compressor with a rating of 200 horsepower or more. It will be placed at least 50 feet from a separator, well test unit, or other non-fired equipment. false 0515fa1d-31dc-43bd-b5a0-491197aa66bd 401279058 24 Drilling/Completion Operations 604.c.(2).K. Pit level Indicators shall be used for tanks on location. false a9f1bb43-290b-48ee-b1d2-58d5d0326ece 401279058 35 Drilling/Completion Operations Operator or contractor will conduct daily visual inspections of the exterior wall and surrounding area for integrity deficiencies. false 6898eeef-5b4f-4022-aa6d-52ae60b0382c 401279058 8 General Housekeeping Maintain appearance with garbage clean-up; a trash bin will be located on site to accumulate waste by the personnel drilling the wells. Site will have unused equipment, trash and junk removed immediately. false 181f8dc9-711a-4669-85af-5f34f81e10c2 401279058 41 Final Reclamation 604.c.(2)T. Within 90 days subsequent to the time of plugging and abandonment of the entire site, superfluous debris and equipment shall be removed from the site. Identification of plugged and abandoned wells will be identified pursuant to 319.a.(5) false 0df761a5-2a40-4b62-8cb6-5f0c1cf18607 401279058 14 Construction 803. Permanent lighting will be installed around the facility to allow both the operator and haulers to conduct safe operations at night. All lights will be directed down toward the location or shielded so no light pollution leaves the facility. false 950a4056-2047-4824-93d3-63f437c2ea33 401279058 42 Final Reclamation 604.c.(2).U. The operator shall identify the location of the wellbore with a permanent monument as specified in Rule 319.a.(5). The operator shall also inscribe or imbed the well number and date of plugging upon the permanent monument false 17847648-f901-4554-8def-66bcf99f4dee 401279058 11 Material Handling and Spill Prevention 604.c.(2)F. Leak Detention Plan: Extraction will monitor production facilities weekly at a minimum to a maximum of daily to identify fluid leaks, including, but not limited to, visually inspecting all wellheads, tanks and fittings. Additionally annual SPCC inspections will be conducted and documented. Annual flowline testing will also occur according to COGCC rules 1101 and 1102. Inspection and record retention of flowline testing will be in accordance per COGCC regulation. All records will be made available to the COGCC upon request. false 4a55fced-55d4-4563-aad5-65b4c5191042 401279058 17 Construction 604.c.(2).G. Berm construction. Tank berms shall be constructed of steel rings with a synthetic or engineered liner and designed to contain 150% of the capacity of the largest tank. All berms will be visually checked weekly at a minimum to a maximum of daily to ensure proper working condition. Secondary containment devices shall be sufficiently impervious to contain any spilled or released material. No potential ignition sources shall be installed inside the secondary containment area unless the containment area encloses a fired vessel. false fc0cd487-35ee-496f-98b6-1f96e8b9d5a5 401279058 26 Drilling/Completion Operations 604.c.(2)B.i. Operator will be utilizing a closed loop system. false 16868e34-3ea6-4a8d-a91e-278ea39d48ab 401279058 3 Planning 604.c.(2)J.ii Backup stabbing valves will be required on well servicing operations during reverse circulation. Valves shall be pressure tested before each well servicing operation using both low-pressure air and high-pressure fluid. false b155a17c-dd65-4b38-97fc-7be5ade004f2 401279058 31 Drilling/Completion Operations Operator will comply with the testing and re-inspection requirements and associated written standard operating procedures (SOP) listed on the design package. false 4749432c-139f-41ad-b5c3-77c86928ae36 401279058 38 Drilling/Completion Operations A fabric reinforced liner will be utilized. In the event that a tank breach were to occur, the fabric reinforced liner will prevent a “zippering” failure from occurring. The liner will meet the specifications per the design package. false 4eed6379-25f5-46eb-b307-8396e33909c7 401279058 7 General Housekeeping 804. Visual Impacts: All long term facility structures will be painted a color that enables the facilities to blend in with the natural background color of the landscape, as seen from a viewing distance and location typically used by the public false 168dc609-2657-44e2-970c-802341552bfe 401279058 19 Emissions mitigation Operator will bring a new or expand existing gas sales lines, in a timely manner, to send salable quality gas immediately down the sales line. false c51e343d-d94e-4854-883d-87f81a273f93 401279058 30 Drilling/Completion Operations Operator will be present during initial filling of the MLVT and the contractor will supervise and inspect the MLVT for leaks during filling. false 15fd4c5b-9359-4ab8-ac9b-920771dcc58b 401279058 20 Emissions mitigation 604.c.(2)C.i. Green Completions - Emission Control System. Test separators and associated flow lines and sand traps shall be installed on-site to accommodate green completions techniques pursuant to COGCC Rules. false 75287d85-d707-4117-9d00-968ede12d6c3 401279058 27 Drilling/Completion Operations Operator has an MLVT Design Package, certified and sealed by a licensed professional engineer, which is on file in their office and available upon request. The site shall be prepared in accordance with the specifications of the design package prior to tank installation; including ensuring that proper compaction requirements have been met. false 4a296959-455e-423a-82fe-9cba2300b78c 401279058 34 Drilling/Completion Operations Access to the MLVT will be limited to operational personnel and authorized regulatory agency personnel. false 51068a52-ed0d-46b6-b486-9432cef0335b 401279058 39 Drilling/Completion Operations Operator acknowledges and will comply with the Colorado Oil & Gas Conservation Commission Policy on the Use of Modular Large Volume Tanks in Colorado dated June 13, 2014. false dc0d9e64-4bfd-4479-ae32-a0e21cef8712 401279058 9 General Housekeeping 604.c.(2)P. Trash Removal: All trash, debris and material not intrinsic to the operation of the oil and gas facility shall be removed and legally disposed of as applicable. false 18ad90be-8384-4d38-9d8e-a70d81114901 401279058 4 Planning 604.c.(2)N. Control of fire hazards: All material that is considered a fire hazard shall be a minimum of 25’ from the wellhead tanks or separators. Electrical equipment shall comply with API IRP 500 and will comply with the current national electrical code. false 459ba4a1-cd6e-4309-b2bb-aa80e922264e 401279058 6 Traffic control 604.c.(2)D: A traffic plan will be planned with Weld County in the WOGLA permit and an access permit will be required through the WOGLA permit. false b77ac3d7-5c10-4600-bee7-ba6aeb27ce28 401279058 36 Drilling/Completion Operations Operator has developed a contingency plan/emergency response plan associated with the MLVT and it is on file at their office. false 2b600c9f-e028-4173-95d7-bc98d191732d 401279058 21 Odor mitigation 805. Oil & gas facilities and equipment shall be operated in such a manner that odors and dust do not constitute a nuisance or hazard to public welfare. Operator is in the process of implementing a new base fluid for Oil Base Mud systems. The aromatics and BTEX concentrations are much less than that of generic diesel. With these two things being the major contributors to the odor from diesel, this should lead to less odor at the drill site caused by OBM. false 11bfbe55-35ef-4b62-910c-6e2e55064fb3 401279058 32 Drilling/Completion Operations Signs will be posted on the MLVT indicating that the contents are freshwater. false 7d958e28-c237-41dc-a811-c584db45549d 401279058 13 Dust control 805.c. Operator shall employ practices for control of fugitive dust caused by their operations. Such practices shall include but are not limited to the use of speed restrictions, regular road maintenance, restriction of construction activity during high- wind days, and silica dust controls when handling sand used in hydraulic fracturing operations. Additional management practices such as road surfacing, wind breaks and barriers may be used. false 215cc94f-9fac-4a3a-9ad6-dffcffad263a 401279058 22 Drilling/Completion Operations 604.c.(2).I. BOPE testing for drilling operations. Upon initial rig-up and at least once every thirty (30) days during drilling operations thereafter, pressure testing of the casing string and each component of the blowout prevention equipment including flange connections shall be performed to seventy percent (70%) of working pressure or seventy percent (70%) of the internal yield of casing, whichever is less. Pressure testing shall be conducted and the documented results shall be retained by the operator for inspection by the Director for a period of one (1) year. Activation of the pipe rams for function testing shall be conducted on a daily basis when practicable. false 548d5c53-8d8d-46be-b1e7-b14d3f592be4 401279058 15 Construction 604.c.(2).Q. All guy line anchors left buried for future use shall be identified by a marker of bright color not less than four (4) feet in height and not greater than one (1) foot east of the guy line anchor. false ec420849-26f9-4ba2-b44c-b5416964ba2b 401279058 25 Drilling/Completion Operations 604.c.(2).O. All loadlines shall be bull plugged or capped. false d77c4724-4f20-4112-92b9-e80634638b83 401279058 16 Construction 604.c.(2).E. This will be a multi-well pad, located in a manner which allows for the greatest distances possible from building units. false 2dac5b80-048f-4945-973c-e8f157b48ec6 401279058 12 Material Handling and Spill Prevention 604.c.(2)R Tank Specifications: Tanks will be designed, constructed and maintained in accordance with NFPA Code 30 (2008 version). All tanks are visually inspected by the operator weekly at a minimum to a maximum of daily and annual SPCC inspections will be conducted and documented. Inspection and record retention of tank inspections will be in accordance per SPCC regulation. All records will be made available to the COGCC upon request. false 3e4dbcd8-d6dc-4d8b-b88d-c88f224703da 401279058 2 Planning 604.c.(2)J.i Blowout Prevention Equipment (“BOPE”): A double ram and annular preventer will be used during drilling. Stabbing valves shall be installed in the event of reverse circulation and shall be prior tested with low and high pressure fluid. false 6de734e6-e40c-4844-99b2-c948d976e107 401279058 40 Interim Reclamation Operator shall be responsible for segregating the topsoil, backfilling, re-compacting, reseeding, and re-contouring the surface of any disturbed area so as not to interfere with Owner’s operations and shall reclaim such area to be returned to pre-existing conditions as best as possible with control of all noxious weeds. false 4ed15ea5-defe-4fd8-86c9-c9f897f24c51 401279058 23 Drilling/Completion Operations 604.c.(2)L. Closed chamber drill stem tests shall be allowed. All other drill stem tests shall require approval by the Director. None planned for this well. false 401279058 Jet Family Trust

18425 Wagon Trail

Mead CO 80542 401279058 24 12 2 29 1 3 Extraction will trench flowlines in one piping corridor that runs between the drill pad and the separator pad and be placed at 12” centers. These lines will most likely be 2” or 3” fusion bonded SCH160 steel pipe and have proper cathodic protection throughout the run. Extraction will then sweep up with a long radius that will tie off each line to the appropriate separator. All welds on these are 100% x-ray and hydro tested to the API and Manufactures specs for a class 1500 series flange. Also meets ASME code B31.4. 1 401279058 C true 401279058 F true 401279058 false false false false false false false false Thread was being aborted.