<_x0034_01251195>

401251195 02A 2017-04-25T09:50:13.03-06:00 47120 KERR MCGEE OIL & GAS ONSHORE LP

P O BOX 173779

DENVER CO 80217-3779 SHAYELYN MARSHALL 720 929 6907 720 929 7907 SHAYELYN MARSHALL REGULATORY ANALYST 2017-04-25T09:50:13.03-06:00 2017-05-10T15:40:53.323-06:00 UPLOADED shayelynmarshall 2017-04-04T14:44:05.747-06:00 shayelynmarshall DJREGULATORY@ANADARKO.COM 6.00000 SHAYELYN.MARSHALL@ANADARKO.COM consultation box checked fro SWH masonm masonm 2017-05-18T11:00:30.497-06:00 401251195 true true false true false false 3-5HZ HAMMER WELD SWSW 3 1N 68W 6 5045 1306 FSL 486 FWL 40.076616 -104.997205 1.5 2016-12-15T00:00:00-07:00 ROB WILSON 9 1 2 11 9 1 Please see Comments section. Description of pipelines and flow lines does not fit in space provided. 2017-09-01T00:00:00-06:00 2017-12-01T00:00:00-07:00 5045 true false false OFFSITE Commercial Disposal Please see Comments section. Disposal description will not fit in space provided. FEE FEE true false false true applicant is owner true 20010124 true true 40—Nunn loam, 1 to 3 percent slopes true false true 2017-03-15T00:00:00-06:00 Tall tumble mustard - Sisymbrium altissimum, Russian thistle - Salsola tragus, burning bush - Bassia sieversiana, prickly lettuce - Lactuca erriola, horseweed - Conyza Canadensis, field bindweed -Convolvulus arvensis (NOXIOUS WEED-C-LIST) false true false false false false false false false 530 710 30 false false No false false 10.00 2.00 true OFFSITE Commercial Disposal true 149021 true Nearest surface water features: Ditch: 530' E Elev: 5047' Loc Elev: 5045' Nearest water wells: 710' WSW, Permit 26052-F, depth unknown, Static Water Level unknown, Elev 5062' 1728' N, Permit 2374-, depth 32', Static Water Level 12', Elev 5027' Sensitive Area Determination: NOT A SENSITIVE AREA 318A false false false false false false false false false NO true false true false false false false false false false false 401251195 Drilling fluids disposal: KMG will reuse water-based drilling fluids to the maximum extent possible, at which point they will either be land applied or taken to a licensed, commercial disposal site; the decision will be based upon laboratory analysis of fluids. KMG will reuse oil-based drilling fluids to the maximum extent possible, at which point they will be returned to the fluids manufacturer for reconditioning or disposal at a licensed, commercial disposal site. Cuttings disposal: Water-based cuttings will be disposed of using a Centralized E&P Waste Management facility or a private spread field, depending on what is feasible at the time of drilling. Oil-based cuttings will be disposed of offsite and at a licensed, commercial disposal site. Pipelines: Buried pipelines will be utilized to gather the gas and oil product from the location (3 gas pipelines, 1 oil pipeline). Both gas and oil pipelines will be constructed from steel of suitable wall thickness and material grade to meet the respective gathering systems design pressure. Gas pipelines will range in diameter from 4” to 20”; oil pipelines from 4” to 12”. Capacity of pipelines will vary based on diameter. Pipelines will begin at the location and terminate at larger trunk lines in the area. Temporary above ground polyethylene water pipelines (diameter 10” – 12” with a 60 BPM capacity) will deliver water to location operations from larger trunk lines. Flow Lines: Nine flow lines will flow to the production facility location. During production, flow direction in the flow lines is from the well head to the production facility. The size of flow lines is typically 2”. Flow lines will be constructed from steel pipe, buried, and will equal the distance between the well heads and the tank battery, approximately 250'. Nine fuel gas supply lines will also be installed from the well head to the production facility. During operation flow direction in the supply lines will be from the production facility to the well head. The size of the supply lines is typically 1”. Supply lines will be constructed from poly or steel pipe, buried, and will equal the distance between the well heads and the tank battery, approximately 250’. Gas lift lines are also occasionally installed (one per well) from the well head to the production facility. During operation flow direction in the gas lift lines will be from the production facility to the well head. The size of the gas lift lines is typically 2”. Gas lift lines will be constructed from steel pipe, buried, and will equal the distance between the well heads and the tank battery, approximately 250’. 401251195 401251195 FORM 2A SUBMITTED 401251195.pdf 401251195 401252584 LOCATION DRAWING HAMMER 3-5HZ LOCATION DRAWING.pdf 831954 401251195 401252587 LOCATION PICTURES HAMMER 3-5HZ LOC PICS.pdf 1282810 401251195 401252590 NRCS MAP UNIT DESC HAMMER 3-5HZ NRCS - 40.pdf 126442 401251195 401252592 REFERENCE AREA PICTURES HAMMER 3-5HZ RANGELAND PICS.pdf 1016018 401251195 401252597 WASTE MANAGEMENT PLAN KMG-APC WASTE MANAGEMENT PLAN 081613.pdf 198226 401251195 401253616 FACILITY LAYOUT DRAWING HAMMER 3-5HZ FACILITY DRAWING APC REV 4-7-17.pdf 6760414 401251195 401260096 PRE-APPLICATION NOTIFICATION CERTIFICATION HAMMER 3-5HZ 305.a.(2) CERTIFICATION (SM).pdf 192376 401251195 401262395 REFERENCE AREA MAP HAMMER 3-5HZ RANGELAND.pdf 243644 401251195 401262513 ACCESS ROAD MAP HAMMER 3-5HZ ACCESS MAP.pdf 515654 401251195 401264509 HYDROLOGY MAP HAMMER 3-5HZ HYDRO.pdf 237555 401251195 401266064 MULTI-WELL PLAN HAMMER 3-5HZ_MULTI-WELL_PLAN_REV_20170421.pdf 86463 401251195 401251202 02 HAMMER 3-1HZ 401251195 401251215 02 HAMMER 3-2HZ 401251195 401251217 02 HAMMER 3-3HZ 401251195 401251219 02 HAMMER 3-4HZ 401251195 401251221 02 HAMMER 3-5HZ 401251195 401251223 02 HAMMER 3-6HZ 401251195 401251224 02 HAMMER 3-7HZ 401251195 401251225 02 HAMMER 3-8HZ 401251195 401251227 02 HAMMER 3-9HZ 8e03115c-2ef9-4bde-968b-018f543186e3 401251195 15 Construction 604c.(2).M. Fencing Requirements: The completed wellsites will be surrounded with a fence and gate with adequate lock to restrict access to authorized personnel only. KMG personnel will monitor the wellsites regularly upon completion of the wells. Authorized representatives and/or KMG personnel shall be on-site during drilling and completion operations. false aa87fbf1-088a-4f75-8454-22fa6f3eaca7 401251195 3 Planning 604c.(2).R. Tank Specifications: A geosynthetic liner will be laid under the tanks on this location and a steel containment will be constructed. Storage tanks will be designed, constructed and maintained in accordance with National Fire Protection Association (NFPA) Code 30 (2008 version). KMG will maintain written records to verify proper design, construction and maintenance. All records will be available for inspection by the Director. false 765e65b8-8880-499a-b058-3e39614e31e7 401251195 13 Dust control 805.c. Dust: Water will be placed on dirt access roads to mitigate dust as needed. If feasible, magnesium chloride will also be used as needed on access roads to further abate dust. false 68887411-3a2b-40b7-9026-638dbf0d2ea9 401251195 18 Final Reclamation 604c.(2).U. Identification of Plugged and Abandoned Wells: Pursuant to rule 319.a.(5)., once the well has been plugged and abandoned, KMG will identify the location of the wellbore with a permanent monument that will detail the well name and date of plugging. false 14db03a6-2827-424a-9539-3c8c06f3e64d 401251195 17 Final Reclamation 604c.(2).T. Well Site Cleared: The wellsite will be cleared of all non-essential equipment within ninety (90) days after all wells associated with the pad have been plugged and abandoned. false 4a798029-403b-49ec-98be-93347a1ec18b 401251195 10 General Housekeeping 604c.(2).W. Site-Specific Measures: KMG maintains a Storm Water Management Plan that assesses erosion control for every KMG operated location. This location will be added to this plan once construction begins. This site will be inspected every fourteen (14) days during construction activities, every twenty-eight (28) days after construction is completed, and after any major weather event. false 28a14d83-c8b4-4ebd-9457-11a399547b2a 401251195 1 Planning 604c.(2).E. Multi-Well Pads: In order to reduce surface impact, this application is for a nine-well pad. false c8c39bd9-78c2-4811-b642-949d5632e29b 401251195 16 Noise mitigation 604c.(2).A. Noise DRILLING: Sound surveys have been conducted on each rig type and are utilized to anticipate any additional effective noise mitigation once a drilling rig is determined. During drilling operations, at a minimum, and pending a safety review after construction of the location, sound mitigation barriers (straw bales) will be placed along the west half of the north side in order to mitigate the building unit to the north west located ~950’ from the edge of the location. COMPLETIONS: During completion operations, at a minimum, and pending a safety review after construction of the location, sound mitigation barriers (straw bales) will be placed along the west half of the north side in order to mitigate the building unit to the north west located ~950’ from the edge of the location. LED lights will be used during completion operations. Should technological advancements allow for better noise mitigation at the time of drilling and completion operations on this location, Kerr-McGee will re-evaluate the most effective method at that time. false c3f1ad83-a87c-41d5-9e36-708253f02daf 401251195 9 General Housekeeping 604c.(2).P. Removal of Surface Trash: A commercial size trash bin for removing debris will be located on site. This bin will be for use by all parties affiliated with the operation. Upon completion of operations, the commercial trash bin will be removed from the location and disposed of in an appropriate manner. false 33d1c448-812d-4808-bb6a-bfb47d3050cf 401251195 6 Community Outreach and Notification 305.a.(2) A Notice of Intent to Conduct Operations was sent to each building unit owner within the Exception Zone or Buffer Zone Setback. Recipients did not contact KMG. As a part of planning this proposed location, Kerr-McGee held multi-disciplinary Surface Impact Planning Meetings regarding the impacts and mitigations associated with this proposed location. The toll-free hotline number and email for the Anadarko Colorado Response Line will be posted at the entrance to the lease access road for stakeholders during drilling and completion operations at this proposed location. Courtesy Notifications will be sent to impacted stakeholders prior to drilling operations and again prior to completions operations, providing contact information for the Anadarko Colorado Response Line and online resources. false 87d7510f-5e44-4d32-90d4-b3b9191f33f7 401251195 12 Material Handling and Spill Prevention 604c.(2).N. Control of Fire Hazards: KMG and its contractors will employ best management practices during the drilling and production of its wells and facilities and will comply with appropriate COGCC rules concerning safety and fire. KMG will ensure that any material that might be deemed a fire hazard will remain no less than twenty-five (25) feet from the wellhead(s), tanks and separator(s). false b5ebe74c-4470-4d71-969e-ff292721c6fc 401251195 11 Material Handling and Spill Prevention 604c.(2).F. Leak Detection Plan: Automation technology will be utilized at this facility. This technology includes the use of fluid level monitoring for the tanks and produced water sumps, high-level shut offs, and electronic sensors to monitor the interstitial space of double-walled produced water sumps. All automation is monitored by Kerr-McGee’s Integrated Operations Center (IOC), which is manned 24 hours per day, 7 days per week. false d7c82bdc-c4ec-4f03-a736-cd850b7d6ab6 401251195 7 Traffic control 604c.(2).D. Traffic Plan: Prior to the commencement of operations, the operator will obtain access and ROW permits per Weld County Code and implement COAs or traffic control plans as required. false 13ea85dd-bb7c-4ab9-b1d1-7e987ec52317 401251195 14 Construction 604c.(2).G. Berm Construction: A geosynthetic liner will be laid under the tanks on this location and a metal containment will be constructed. Berms or other secondary containment devices will be constructed around crude oil, condensate, and produced water storage tanks and shall enclose an area sufficient to contain and provide secondary containment for 150% of the largest single tank. Berms and other secondary containment devices shall be inspected at scheduled intervals and maintained in good condition false c7da60f6-d92c-49b8-b510-b5353cb46b8d 401251195 4 Planning 604c.(2).R. Tank Specifications: Two 500 barrel skid-mounted frac tanks will be temporarily placed on-site for use of the pre-spud rig only. One tank will store water and the other will store water based mud. false b530442b-5cb2-4f45-9cbc-baa9db9f7a38 401251195 2 Planning 604c.(2).Q. Guy Line Anchors: Guy line anchors will not be used. Base Beams will be used to stabilize the rig and removed after drilling. false f802ed19-151f-421b-bec6-135d84a7ad7f 401251195 8 General Housekeeping 604c.(2).O. Loadlines: All loadlines shall be bullplugged or capped. false 04de26e0-3bbd-466d-a7d1-e3a746064cbe 401251195 5 Planning 604c.(2).S. Access Roads: KMG will utilize a lease access road from CR 12 for drilling, completions, and production operations, including maintenance equipment. The road will be properly constructed and maintained to accommodate for local emergency vehicle access. false 401251195 ANADARKO E&P COMPANY LP

PO BOX 173779

DENVER CO 80217 401251195 9 1 2 11 9 1 Please see Comments section. Description of pipelines and flow lines does not fit in space provided. 401251195 C true 401251195 F true 401251195 false true false false false false false false

Thread was being aborted.