<_x0034_01127762>

401127762 02 2016-11-23T12:06:01.153-07:00 10311 SYNERGY RESOURCES CORPORATION

20203 HIGHWAY 60

PLATTEVILLE CO 80651 Erin Ekblad 720 616.4319 720 616.4301 Erin Ekblad Manager Regulatory Affair 2016-11-23T12:06:01.153-07:00 2016-11-23T14:37:54.78-07:00 UPLOADED eekblad 2016-10-11T09:58:39.64-06:00 eekblad eekblad@syrginfo.com 3.00000 false 448368 eekblad@syrginfo.com westerdb westerdb 2016-11-23T16:07:30.933-07:00 2 401127762 DR N N OIL SINGLE N Orr 14N-32C-M 15927 NESE 36 6N 67W 6 474 WATTENBERG FEL 2258 90750 4725 FSL WELD HORIZONTAL 75 2580 FWL STATE 817 FSL 80/5074-S 31 FEE 6N 66W 640 6N-67W 36:ALL FWL 790 0 FSL 32 32 6N 66W FEET FEET N N N Y OFFSITE Commercial Disposal 20090043 ANNULAR PREVENTOR DOUBLE RAM 40.442472 -104.834243 2016-07-22T00:00:00-06:00 Darin Zicafoose 1.4 false false true false false false false false false false false false false false false STATE true Surface Use Agreement 460 FEET 6N-67W 36: SESE 6N-66W 31: S2S2; 32: S2SW, SWSE 95 FEET true 318A OFFSITE Commercial Disposal false false false false false false false true true false false false mpatel@syrginfo.com false false 401127762 Surface Use Agreement has waivers for Rule 318A.a & 318A.c. See page 4, Section 9 (a). The Distance of 95 feet, to the nearest wellbore belonging to another operator on the “Drilling & Waste Plans” tab, STATE 4-36 05.123.11958, was measured via anti-collision report. The Distance of 32 feet to nearest wellbore on "Spacing and Formations" tab, LOWE 32-14D 05.123.23762, was measured via Plan View Map Measurement. This location has an approved Form 2A, doc #401102534. 401127762 401127762 FORM 2 RESUBMITTED 401127762.pdf 401127762 401152536 FORM 2 SUBMITTED LF@3983762|401127762 401127762 401152537 FORM 2 REJECTED 401152537.pdf 401127762 401154412 DEVIATED DRILLING PLAN ORR 14N-32C-M PWP (REV-A.1) WELL PLAN.pdf 654208 401127762 401154415 DIRECTIONAL DATA Synergy_Orr 14N-32C-M.xlsm 33330 401127762 401154420 SURFACE AGRMT/SURETY SUA Orr State.pdf 3293522 401127762 401154483 WELL LOCATION PLAT ORR 14N-32C-M.pdf 3406409 401127762 401154511 PROPOSED SPACING UNIT Orr 14N-32C-M Proposed Spacing Unit.pdf 313384 401127762 401154512 WAIVERS Rule 305 and 306 Waiver Request Letter-LGD signed.pdf 142859 401127762 401154516 STIMULATION SETBACK CONSENT Orr 14N-32C-M Waiver Signed.pdf 124331 401127762 401154792 WAIVERS Rule 305 & 306- Notice & Consultation Waiver Surface Owner.pdf 153967 401127762 401154793 OPEN HOLE LOGGING EXCEPTION FINAL Orr State 40-36 Pad Open Hole Logging Exception 10-14-2016.pdf 129746 401127762 401154794 EXCEPTION LOC REQUEST Final Rule 303.i. (2) Request for Permit Issuance without Notice or Consultation Letter Orr State 40-36 Pad.pdf 1544703 401127762 401154795 EXCEPTION LOC REQUEST Final 318 A.a. & 318A.c. Exception Twinning Location.pdf 218367 401127762 401155338 FORM 2 SUBMITTED 401127762.pdf 401127762 401155544 OffsetWellEvaluations Data Final 11.23.2016 MH Offset Mitigation - Orr (003).xlsx 36808 401127762 401155546 OFFSET WELL EVALUATION Final 11.23.2016 MH Offset Mitigation - Orr (003).pdf 247583 401127762 401155548 FORM 2 RESUBMITTED 401127762.pdf 8eaae296-1652-4ce4-9866-1ba7421c7338 401127762 8 Drilling/Completion Operations One of the first wells drilled on the pad will be logged with Cased hole Pulsed Neutron Log with Gamma Ray Log from the kick-off point to into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on production casing (or on intermediate casing if production liner is run) into the surface casing. The horizontal portion of every well will be logged with a measured while-drilling gamma-ray log. The Form 5, Completion Report, for each well on the pad will list all logs run in that well and have those logs attached. The Form 5 for each well shall clearly state “No open- hole logs were run” and shall reference the Rule 317.p Exception granted for the well. false 5716cf69-a213-42f9-8ffe-321fc86a02a0 401127762 4 Drilling/Completion Operations Drilling/Completions Operations: RULE 604.c.I: Upon initial rig-up and at least once every thirty (30) days during drilling operations thereafter, pressure testing of the casing string and each component of the blowout prevention equipment including flange connections shall be performed to seventy percent (70%) of working pressure or seventy percent (70%) of the internal yield of casing, whichever is less. Pressure testing shall be conducted and the documented results shall be retained by the operator for inspection by the Director for a period of one (1) year. Activation of the pipe rams for function testing shall be conducted on a daily basis when practicable. false 0919ec33-47b7-4e0f-94ad-651f4f74d9f1 401127762 2 Planning Planning: 604.c.(2)J.ii Backup stabbing valves be required on well servicing operations during reverse circulation. Valves shall be pressure tested before each well servicing operation using both low-pressure air and high-pressure fluid. false 9a7a70ba-39bc-4e37-bd5a-696d4dff07da 401127762 6 Drilling/Completion Operations Drilling/Completion Operations; 604.c.(2).O. Drilling and Completion-All loadlines shall be bullplugged or capped. false 939d0127-047a-4ea3-9bcf-c4431e60be0d 401127762 3 Emissions mitigation Emissions Mitigation: 604.c.(2)C.i. Green Completions - Emission Control System: Test separators and associated flow lines and sand traps shall be installed on-site to accommodate green completions techniques pursuant to COGCC Rules. The flowback gas shall be sold or shall be captured and combusted with an Emissions Control Device (ECD), which will be installed and kept in operable condition for least the first 90-days of production pursuant to CDPHE rules. This ECD shall have an adequate capacity for 1.5 times the largest flowback within a 10 mile radius, and will be piped to other or permanent equipment and shall be provided with the equipment needed to maintain combustions where non-combustible gases are present. There is a sales line available, Synergy plans to turns to sales as soon as possible. false 2176de9f-568d-4ff2-b28d-6d020360f788 401127762 5 Drilling/Completion Operations Drilling/Completion Operations: 604.c.(2)L. Closed chamber drill stem tests shall be allowed. All other drill stem tests shall require approval by the Director. None planned for this well. false 583e190e-93b1-41a9-9419-e700a6440894 401127762 1 Planning Planning: 604.c.(2)J.i Blowout Prevention Equipment (“BOPE”): A double ram and annular preventer will be used during drilling. Stabbing valves shall be installed in the event of reverse circulation and shall be prior tested with low and high pressure fluid. false 55e2882c-a9f1-405b-b89d-e8f75274f56b 401127762 10 Drilling/Completion Operations Anti-collision: Operator will perform an anti-collision evaluation of all active (producing, shut in, or temporarily abandoned) offset wellbores that have the potential of being within 150 feet of a proposed well prior to drilling operations for the proposed well. Notice shall be given to all offset operators prior to drilling. false 567fbee3-a97d-41b1-9d72-fa752fd34ee0 401127762 9 Drilling/Completion Operations Operator will comply with COGCC policy for Bradenhead Monitoring During Hydraulic Fracturing Treatments in the Greater Wattenberg area dated May 29, 2012. false 6e952603-cc4b-4e75-8a8e-e7116a0531a7 401127762 7 Drilling/Completion Operations Drilling/Completion Operations: 604.c.(2)B.i Operator will be utilizing a closed loop system. false 401127762 1ST 8 1 2 5 1 2 17 15927 1983 15927 0 0 PLANNED 401127762 CONDUCTOR 24 16 65 40 35 40 0 0 PLANNED 401127762 SURF 13 1 2 9 5 8 36 1700 464 1700 0 0 PLANNED 401127762 NIOBRARA NBRR 321 GWA Thread was being aborted.