<_x0034_00906200>

400906200 02 2015-12-08T10:52:42.983-07:00 47120 KERR MCGEE OIL & GAS ONSHORE LP

P O BOX 173779

DENVER CO 80217-3779 CHERYL LIGHT 720 929-6461 720 929-7461 CHERYL LIGHT SR. REGULATORY ANALYST 2015-12-08T10:52:42.983-07:00 2015-12-08T10:52:42.547-07:00 UPLOADED lightc 2015-09-28T10:55:06.983-06:00 lightc DJREGULATORY@ANADARKO.COM 3.00000 false 437948 cheryl.light@anadarko.com deaters deaters 2015-12-14T13:53:50.9-07:00 400906200 DR GAS SINGLE JZM 3N-W3HZ 17584 SESW 10 1N 67W 6 1625 WATTENBERG FWL 287 90750 5077 FSL WELD HORIZONTAL 2109 2086 FWL FEE 960 FSL 10 FEE 1N 67W 800 Township 1 North, Range 67 West, 6th P.M. Section 10: E/2, E/2W/2, W/2SW/4 Township 2 North, Range 67 West, 6th P.M. Section 28: S/2SW/4 Section 34: NW/4 Weld County, Colorado FWL 50 0 FNL 3 211 1N 67W FEET FEET N N N Y OFFSITE Commercial Disposal Please see Comments section. Disposal description will not fit in space provided. 20010124 ANNULAR PREVENTOR DOUBLE RAM ROTATING HEAD 40.059061 -104.880513 2015-10-12T00:00:00-06:00 ROB WILSON 1.3 true false false false false false false false false false false false false false false FEE true Surface Use Agreement 539 FEET 01N-67W-Sec 03 E/2W/2 01N-67W-Sec 10 E/2W/2 02N-67W-Sec 34 SE/4SW/4 70 FEET true 318A OFFSITE Commercial Disposal true true false false false false false true true false false false JULIE.TANNEHILL@ANADARKO.COM false 400906200 Amending location to add a well to the location and the location of the pad is being moved. Drilling fluids disposal: KMG will reuse water-based drilling fluids to the maximum extent possible, at which point they will either be land applied or taken to a licensed, commercial disposal site; the decision will be based upon laboratory analysis of fluids. KMG will reuse oil-based drilling fluids to the maximum extent possible, at which point they will be returned to the fluids manufacturer for reconditioning or disposal at a licensed, commercial disposal site. Cuttings disposal: If the surface owner authorizes, and if it is feasible for this location at the time of drilling, water-based cuttings will be disposed of onsite using bioremediation/solidification product. If the surface owner does not authorize onsite disposal and/or it is not feasible for this location at the time of drilling, water-based cuttings will be disposed of using a Centralized E&P Waste Management facility or a private spread field. Oil-based cuttings will be disposed of offsite and at a licensed, commercial disposal site. 4 flow lines will flow to the production facility location. During production, flow direction in the flow lines is from the well head to the production facility. The size of flow lines is typically 2”. Flow lines will be constructed from steel pipe, buried, and will equal the distance between the well heads and the tank battery, approximately 2710’. 4 fuel gas supply lines will also be installed from the well head to the production facility. During operation flow direction in the supply lines will be from the production facility to the well head. The size of the supply lines is typically 1”. Supply lines will be constructed from poly or steel pipe, buried, and will equal the distance between the well heads and the tank battery, approximately 2710’. Gas lift lines are also occasionally installed (one per well) from the well head to the production facility. During operation flow direction in the gas lift lines will be from the production facility to the well head. The size of the gas lift lines is typically 2”. Gas lift lines will be constructed from steel pipe, buried, and will equal the distance between the well heads and the tank battery, approximately 2710’. 400906200 400906200 FORM 2 SUBMITTED 400906200.pdf 400906200 400948373 OffsetWellEvaluations Data JZM 3N-W3HZ OFFSET WELL EVAL.xlsx 27540 400906200 400948376 DIRECTIONAL DATA JZM 3N-W3HZ DIR DATA.xlsm 30148 400906200 400948378 OTHER JZM 3N-W3HZ 305.a.(2) CERTIFICATION.pdf 27480 400906200 400948379 DEVIATED DRILLING PLAN JZM 3N-W3HZ DEV DRILLING PLAN.pdf 1283791 400906200 400948381 EXCEPTION LOC WAIVERS JZM 3N-W3HZ PAD 318A.a 318A.c WAIVER.pdf 104944 400906200 400948382 EXPEDITED APPROVAL REQUEST JZM 3N-W3HZ PAD TWEL REQUEST 318A.a 318A.pdf 28960 400906200 400948383 WELL LOCATION PLAT JZM 3N-W3HZ PLAT.pdf 226965 400906200 400948384 PROPOSED SPACING UNIT JZM 3N-W3HZ SPACING MAP.pdf 413032 400906200 400948385 SURFACE AGRMT/SURETY JZM SUA.pdf 1660110 400906200 400906204 02A JZM 3N-W3HZ c49d4d95-8cbe-4b21-97fb-123cb8ef5011 400906200 16 Drilling/Completion Operations 604c.(2).C. Green Completions: Temporary above ground polyethylene water pipelines will deliver water to location operations from larger trunk lines to reduce truck traffic and minimize air pollution. Pipeline infrastructure is in place prior to completions operations to ensure saleable gas, once hydrocarbons are cut, is sent directly to sales without flaring during flowback. false 157431ff-d1c8-4151-b055-1a3c41273950 400906200 5 Planning 604c.(2).S. Access Roads: KMG will utilize a lease access road from CR 10 for drilling and production operations and maintenance equipment. The road will be properly constructed and maintained to accommodate for local emergency vehicle access. false 287f415e-1c12-4d0c-888e-37509f579c4e 400906200 6 Community Outreach and Notification 305.a.(2) A Notice of Intent to Conduct Operations was sent to each building unit owner within the Exception Zone or Buffer Zone Setback. Recipients did not contact KMG. As a part of planning this proposed location, Kerr-McGee held multi-disciplinary Surface Impact Planning Meetings regarding the impacts and mitigations associated with this proposed location. The toll-free hotline number and email for the Anadarko Colorado Response Line will be posted at the entrance to the lease access road for stakeholders during drilling and completion operations at this proposed location. Courtesy Notifications will be sent to impacted stakeholders prior to drilling operations and again prior to completions operations, providing contact information for the Anadarko Colorado Response Line and online resources. false e191b13e-61bb-4755-9433-1c8cc0b05e24 400906200 19 Drilling/Completion Operations 604c.(2).J. BOPE for Well Servicing Operations: Blowout prevention equipment will be used on any servicing operations associated with this well. Backup stabbing valves will be used during any future servicing operations during reverse circulation. Valves shall be pressure tested before each well servicing operation using low-pressure air and high-pressure fluid. false cfd56c83-5096-4c5d-9895-53dfe544bd19 400906200 2 Planning 604c.(2).Q. Guy Line Anchors: Should guy line anchors be left buried for future use, they shall be identified by a bright marker greater than four (4) feet high and no more than one (1) foot east of the guy line anchor. false 683e5389-aa69-4a2d-9dd3-3f0f9fcbfbbe 400906200 26 Final Reclamation 604c.(2).T. Well Site Cleared: The wellsite will be cleared of all non-essential equipment within ninety (90) days after all wells associated with the pad have been plugged and abandoned. false 631da2f9-a69e-4a73-8e0d-5b9ba358a6f3 400906200 25 Drilling/Completion Operations 317.p Logging Program: One of the first wells drilled on the pad will be logged with Open Hole Resistivity Log and Gamma Ray Log from the kick-off point to into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on production casing (or on intermediate casing if production liner is run) into the surface casing. The horizontal portion of every well will be logged with a measured-while-drilling gamma-ray log. The form 5, Completion Report, for each well on the pad will list all logs run and have those logs attached. The Form 5 for a well without open-hole logs shall clearly state "No open-hole logs were run" and shall clearly identify (by API#, well name & number) the well in which open-hole logs were run. false 25f9350d-3f68-407b-b6ce-50b9e45e992f 400906200 12 Dust control 805.c. Dust: Water will be placed on dirt access roads to mitigate dust as needed. If feasible, magnesium chloride will also be used as needed on access roads to further abate dust. false ec4a34c1-35f5-4a70-a6fe-6b0d663d2ecb 400906200 13 Construction 604c.(2).M. Fencing Requirements: The completed wellsites will be surrounded with a fence and gate with adequate lock to restrict access to authorized personnel only. KMG personnel will monitor the wellsites regularly upon completion of the wells. Authorized representatives and/or KMG personnel shall be on-site during drilling and completion operations. false 5c16b28e-1142-4840-93a2-579b2c944d36 400906200 24 Drilling/Completion Operations Anti-Collision: Kerr-McGee will perform an anti-collision evaluation of all active (producing, shut in, or temporarily abandoned) offset wellbores that have the potential of being within one hundred fifty (150) feet of a proposed well prior to drilling operations for the proposed well. Notice shall be given to all offset operators within one hundred fifty (150) feet prior to drilling. false 3b7db1b5-ba37-4680-9510-711900e2ec76 400906200 20 Drilling/Completion Operations 604c.(2).K. Pit Level Indicators: All storage tanks used for active drilling operations (used in lieu of pits) contain pit level monitors with Electronic Drilling Recorders (EDR). KMG uses EDRs with pit level monitor(s) and alarm(s) for production rigs. Basic level gauges are used on tanks utilized for the surface rig. false b60c5268-1ba1-4764-8edb-8564a34f432d 400906200 15 Drilling/Completion Operations 604c.(2).B. Closed Loop Drilling System: KMG will use a closed loop or “pitless” system for drilling and fluid management and will not construct a reserve pit. false bf3c0ab0-cf31-4b33-9067-a1728a34e597 400906200 22 Drilling/Completion Operations 803. Lighting: To the extent practicable, site lighting shall be shielded and directed downward and inward toward operations to avoid glare on public roads and nearby Building Units. false 37d6e521-a75a-4a76-b450-a2440308fbea 400906200 7 Traffic control 604c.(2).D. Traffic Plan: If required by the local government, a traffic plan will be coordinated with the local jurisdiction prior to commencement of operations. false 1d8a26f6-4ae8-4414-9bdc-9a10de80e007 400906200 23 Drilling/Completion Operations Kerr McGee acknowledges and will comply with the COGCC Policy for Bradenhead Monitoring during Hydraulic Fracturing Treatments in the Greater Wattenberg Area dated May 29, 2012. false 346f52fc-1e96-4183-9bbb-9ae5e5f7b224 400906200 3 Planning 604c.(2).R. Tank Specifications: Two 500 barrel skid-mounted frac tanks will be temporarily placed on-site for use of the pre-spud rig only. One tank will store water and the other will store water based mud. false 14b38483-5596-4a23-b95d-a392aecd29ad 400906200 1 Planning 604c.(2).E. Multi-Well Pads: In order to reduce surface impact, this application is for a 4 well pad. false 61cf3925-b1fc-40da-96c0-abfc20482539 400906200 14 Noise mitigation 604c.(2).A. Noise: Pending a safety review after construction of the location, sound mitigation barriers (straw bales) will be placed on the souteast corner, east side and northeast side of the pad. Sound surveys that have been conducted on each rig type are utilized to anticipate any additional noise mitigation once a drilling rig is determined. false 1b588760-21df-4187-9a70-c981281972c6 400906200 11 Material Handling and Spill Prevention 04c.(2).N. Control of Fire Hazards: KMG and its contractors will employ best management practices during the drilling and production of its wells and facilities and will comply with appropriate COGCC rules concerning safety and fire. KMG will ensure that any material that might be deemed a fire hazard will remain no less than twenty-five (25) feet from the wellhead(s), tanks and separator(s). false 0f245df2-008f-4eb1-a751-819d87eb056c 400906200 27 Final Reclamation 604c.(2).U. Identification of Plugged and Abandoned Wells: Pursuant to rule 319.a.(5)., once the well has been plugged and abandoned, KMG will identify the location of the wellbore with a permanent monument that will detail the well name and date of plugging. false c093afe8-c1c2-4366-80bd-936516b5fef2 400906200 8 General Housekeeping 604c.(2).O. Loadlines: All loadlines shall be bullplugged or capped. false f93ce99a-9197-4bfd-a934-d2f6a6df8905 400906200 18 Drilling/Completion Operations 604c.(2).I. BOPE Testing for Drilling Operations: Upon initial rig-up, BOPEs will be tested at a minimum of every 30 days. false 54d430d2-b925-4b87-81d2-9601494a6329 400906200 21 Drilling/Completion Operations 604c.(2).L. Drill Stem Tests: No drill stem tests are planned and none will be performed without prior approval from the Director. false fe35a7fa-a621-4af0-955b-96538d0f94ea 400906200 17 Drilling/Completion Operations 604c.(2).H. BOPE: Our rigs at a minimum will have a double ram with blind and pipe ram and annular preventer. false f8b46ac4-35a8-4a17-ad27-e05d441647f6 400906200 10 Storm Water/Erosion Control 604c.(2).W. Site-Specific Measures: KMG maintains a Storm Water Management Plan that assesses erosion control for every KMG operated location. This location will be added to this plan once construction begins. This site will be inspected every fourteen (14) days during construction activities, every twenty-eight (28) days after construction is completed, and after any major weather event. false 989d0bd4-e96c-4b9a-a831-bc66cff42394 400906200 4 Planning 604c.(2).V. Development From Existing Well Pads: Drilling from an existing well pad was not feasible for the development of the wells on this proposed oil and gas location; however, this well pad will be considered for future well locations. false 650c02fa-4abf-40c1-9a69-f487821331e7 400906200 9 General Housekeeping 604c.(2).P. Removal of Surface Trash: A commercial size trash bin for removing debris will be located on site. This bin will be for use by all parties affiliated with the operation. false 400906200 1ST 8 3 4 7 0 0 26 7945 890 7945 0 0 PLANNED 400906200 2ND 6 1 8 4 1 2 11.6 17584 700 17584 6844 PLANNED 400906200 SURF 13 1 2 9 5 8 36 1800 680 1800 0 0 PLANNED 400906200 NIOBRARA NBRR 360 GWA Thread was being aborted.