<_x0034_00586424>

400586424 06 96155 WHITING OIL AND GAS CORPORATION

1700 BROADWAY STE 2300

DENVER CO 80290 Sonia Stephens 303 928-7128 303 218-5678 Sonia Stephens Regulatory Technician 2014-04-09T08:10:28.483-06:00 DRAFT sstephens 2014-04-09T08:10:28.483-06:00 sstephens regulatory@petro-fs.com 0.00000 regulatory@petro-fs.com sstephens sstephens 2014-04-09T10:06:47.36-06:00 400586424 Rains, Bill 970 590-6480 05 123 07502 00 FREGEAU 2 SESE 9 10N 58W 6 WELD WILDCAT 99999 N OTHER � � N � 40.848284 -103.864797 1972-07-22T00:00:00-06:00 0.0 Re-Plug and Abandon Procedure. 1. Notify COGCC at least 48-hours prior to the start of operations using a Form 42. Verify with James Kopp that this is completed prior to moving the rig in. 2. Take GPS coordinates of well location. Send information to: James Kopp James.Kopp@whiting.com 303-357-1410 3. MIRU Bayou Rig. Mob-in pump, swivel, tank, and 2-7/8" PH-6 workstring. NU 7-1/16" 5K BOP w/ 2-7/8" pipe rams on top and blind rams on bottom, pressure test high and low. PU full gauge 7-7/8" bit & TIH on 2-7/8" tubing. 4. Drill out existing cement plugs sown t approximately 157 ftKB. 5. Clean out to approximately 6,700 ftKB. 6. Once depth has been reached, TOOH with 2-7/8" workstring standing back. 7. MIRU gyro equipment. PU tools and RIH while logging down to 6,700 ftKB. POOH while logging, LD tools. 8. MIRU wireline crew. PU logging tools and NU pack-off lubricator. RIH w/ logging tools to 6,700 ftKB. Log full length of wellbore. POOH, ND pack-off or lubricator & LD tools. Send data to Denver office for review. Onsite Whiting geologist to review logging data and verify sidewall core sample intervals. 9. PU sidewall rotary coring tools and NU pack-off or lubricator. RIH w/ coring tools to first interval verifed by Whiting geologist and core 10 intervals uphole. POOH, ND pack-off or lubricator & LD tools. Verify that all core samples were successfully collected. RD wireline crew. 10. MIRU cement crew. Pressure test surface lines to 2,000 psi. Mix and pump 60 sacks, API Class G, 1.15 cu/ft/sk, 15.8 ppg cement, balancing plug at 900 ftKB. TOOH with 2-7/8" workstring standing back. Let cement cure overnight. 11. TIH with 2-7/8' workstring. Tag TOC with EOT, record depth. 12. MIRU cement creww. Pressure test surface lines to 2,000psi. Mix and pump 65sks, API Clss G, 1.15 cu-ft/sk, 15.8 ppg cement, balancing plug from 200 ftKB to surface. TOOH with 2-7/8" worksting standing back. Let cement cure overnight. 13. TIH with 2 -7/8" workstring. Tag TOC with EOT, record depth. 14. MIRU cement crew. Pressure test surface lines to 2,000psi. Mix and pump 65sks, API Clss G, 1.15 cu-ft/sk, 15.8ppg cement, balncing plug from 200 ftKB to surface. TOOH with 2-7/8" workstring, LD on float. 15.Cut off WH to 5' below GL and fill hole. 16. Weld on cap with plugging information plate. Backfill cellar. 17.Reclaim disturb surface. Pictures and the Access Agreement is attached as " Other". bill.rains@state.co.us true 400586424 400586424 FORM 6 INTENT SUBMITTED 400586424.pdf 400586424 400586626 WELLBORE DIAGRAM Current Wellbore Diagram WellView_Fregeau 2.pdf 68605 400586424 400586627 WELLBORE DIAGRAM Proposed Wellbore Diagram_Fregeau 2.pdf 146593 400586424 400586630 OTHER Location Photos_Fregeau 2.pdf 427707 400586424 400586634 OTHER Access Letter - Signed_Jeffrey Fregeau.pdf 20432 400586424 400586691 PROPOSED PLUGGING PROCEDURE Re-Plug and Abandon Procedure_Fregeau 2.pdf 70452 400586424 0 false 400586424 1 false 400586424 2 OPEN HOLE 60 5600 5800 true 400586424 3 OPEN HOLE 60 700 900 true 400586424 4 false 400586424 5 false 400586424 6 false 400586424 7 false 400586424 8 false 400586424 9 false 400586424 10 65 0 200 false 400586424 11 false 400586424 12 false 400586424 13 false 400586424 14 false 400586424 15 false 400586424 16 false 400586424 SURF 12 1 4 8 5 8 24 123 65 123 0 ACTUAL Thread was being aborted.