<_x0034_00282392>

400282392 05 96850 WPX ENERGY ROCKY MOUNTAIN LLC

1001 17TH STREET - SUITE #1200

DENVER CO 80202 Julie Lawson 303 260-4533 303 629-8268 Julie Lawson Permit Tech II 2012-05-08T12:41:47.487-06:00 DRAFT lawsonj 2012-05-08T12:41:47.487-06:00 lawsonj julie.lawson@wpxenergy.com 0.00000 julie.lawson@wpxenergy.com lawsonj lawsonj 2012-05-08T13:12:11.323-06:00 400282392 05 045 20230 00 GARFIELD ExxonMobil GM 22-26 LOT1 27 6S 96W 6 1007 FNL GRAND VALLEY 1350 707 31290 FNL FEL 2191 COC27743 FWL 2011-07-30T00:00:00-06:00 1356 2011-08-05T00:00:00-06:00 FNL 2011-08-07T00:00:00-06:00 2187 GW FWL 8245 7296 7700 6751 5770 5794 CBL/RPM & Mud Logs 39.499686 -108.087711 2011-03-01T00:00:00-07:00 J. Kirkpatrick 5.2 26 6S 96W 26 6S 96W true true Final Completion 400282392 Please note: the "as-drilled" GPS information provided is actual data of the existing well conductor location prior to the big rig spud date. Surface Pressure = 0 400282392 400282392 FORM 5 SUBMITTED 400282392.pdf 400282392 400282424 DIRECTIONAL SURVEY GM 22-26 Directional Drilling Survey.xlsx 24530 400282392 400282425 CEMENT JOB SUMMARY GM 22-26 Cement Surface Casing PJR.pdf 353709 400282392 400282426 CEMENT JOB SUMMARY GM 22-26 Cement Plug PJR.pdf 831191 400282392 400282428 DIRECTIONAL DATA GM 22-26 Directional Data.pdf 427610 400282392 400282429 OTHER GM 22-26 PvA Plot 12Apr12 kjs.pdf 84612 400282392 1ST 7 7 8 4 1 2 11.6 7647 1050 7647 1630 0 CBL ACTUAL 400282392 CONDUCTOR 26 18 48 85 31 85 0 0 VISU ACTUAL 400282392 SURF 13 1 2 9 5 8 32.3 1428 350 1428 0 0 VISU ACTUAL 400282392 12152 OPEN HOLE 110 8050 8245 400282392 cement work 2011-12-21T00:00:00-07:00 400282392 cement work Plug Procedure: 12/20/2011- RIH to bottom of casing and circulate well w/mud. RIH to 8000' and tag where stopped cleaning previous night. Circulate well and cleanout to PBTD 8242'. Circulate well for 2 hours with 11 PPG drilling mud. Well brought back a fair amount of coal, but cleaned up very well after approx 1 hour. Trip out of hole with tubing. Lay down drill collars, bumper sub and mill. Trip in hole with open ended tubing. left 20 stands in derrick for night. Secure well and drain up. 12/21/2011 - RIH to tag at 8245', no fill up overnight. Circulate well withdrilling mud. RU HES to pump cement and have safety meeting. Pump 110 sacks "Plug Cement" @ 17 PPG. Pumped 19.5 Bbls total slurry down tubing. Displace cement and balance in tubing /across backside. Pull out of cement, to allow to fall out of tubing. Pull up to 8022' and reverse clean tubing. Reversed approx 3.5 Bbls cement. Allow cement to cure. Allow cement to set. Tag cement top at 8050'. Pull tubing up into casing and reverse clean again, with drilling mud. pull 4 more stands to drop fluid level (to avoid freezing), and secure well WSI to allow cement to cure. WSI to allow cement to set up 12/23/2011 - WSI to allow cement to set up. BOP's frozen. Thaw out and RIH. Tag cement top at 8050'. Circulate mud out of well with 11 PPG brine water. Pump 20 bbls past clean. Thread was being aborted.