| Environmental | Form: (15)
403206532
11/06/2024 | Form 2A Doc #403207134 Best Management Practices states "Cuttings from each well will be placed in steel containment bins. Baseline samples of the cuttings will be collected to assess constituent levels listed in COGCC Table 915- 1, the cuttings pile will then be thoroughly mixed with clean fill material to create a composite of the stored materials prior to placement in the cuttings trench. This contingency Sampling of the water/bentonite based drill cuttings will occur regardless of whether the original "background" or "baseline" samples collected from each well drilled are compliant with Table 915-1. The 7-point composite from each well may be used for preliminary analysis and waste profiling; however, discrete sample results will be required for confirmation sampling. The operator will close out the cuttings trench with a Form 27. The operator will propose the number of discrete samples, the locations, and depth intervals for the confirmation samples in the Form 27. The depth intervals will be selected to provide sufficient coverage between 0 and 19 feet below the final top surface of the cuttings within the trench. Upon approval of the Form 27, TEP will collect the proposed samples and analyze them for the Table 915-1 constituents;" |
| Environmental | Form: (15)
403206532
11/06/2024 | Only Cuttings from the 16-wells drilled at the e Federal 298-13-1 well pad (COGCC location ID 315513) shall be received in the cuttings trench. |
| Environmental | Form: (15)
403206532
11/06/2024 | Operator shall provide the actual volume of E&P Waste (Cuttings) disposed of in the cutting trench and list the APIs from which the cuttings originated from. |
| Environmental | Form: (15)
403206532
11/06/2024 | Operator shall submit a Form 27 Site Investigation and Remediation Plan addressing the BMP 13 (Cuttings management) on Form 2A Doc #403207134. |