| OGLA | Form: (02A)
400170489
06/11/2011 | Operator must implement best management practices to contain any unintentional release of fluids, including any fluids conveyed via temporary/permanent surface pipelines.
|
| OGLA | Form: (02A)
400170489
06/11/2011 | A closed loop system (which operator has indicated on the Form 2A - Section 6. Construction) must be implemented during drilling.
|
| OGLA | Form: (02A)
400170489
06/11/2011 | Operator must ensure secondary containment for any volume of fluids contained at well site during drilling and completion operations; including, but not limited to, construction of a berm or diversion dike, diversion/collection trenches within and/or outside of berms/dikes, site grading, or other comparable measures (i.e., best management practices (BMPs) associated with stormwater management) sufficiently protective of nearby surface water. Any berm constructed at the well pad location will be stabilized, inspected at regular intervals (at least every 14 days), and maintained in good condition. |
| OGLA | Form: (02A)
400170489
06/11/2011 | If fracing operations occur, flowback and stimulation fluids must be sent to tanks and/or filters before the fluids can be placed into any pipeline or pit. The flowback and stimulation fluid tanks and/or filters must be placed on the well pad in an area with additional downgradient perimeter berming. The area where flowback fluids will be stored/reused must be constructed to be sufficiently impervious to contain any spilled or released material. |
| OGLA | Form: (02A)
400170489
06/11/2011 | The access road will be constructed as to not allow any sediment to migrate from the access road to the nearby surface water or any drainages leading to surface water. |
| OGLA | Form: (02A)
400170489
06/11/2011 | Berms or other containment devices shall be constructed to be sufficiently impervious to contain any spilled or released material around crude oil, condensate, and produced water storage tanks. |