| OGLA | Form: (02A)
400059919
08/12/2010 | Notice to Operators (NTO) Drilling Wells on the Roan Plateau in Garfield County: Operator must comply with all provisions of the June 12, 2008 Notice to Operators (NTO) Drilling Wells Within ¾ Mile of the Rim of the Roan Plateau in Garfield County – Pit Design, Construction, and Monitoring Requirements. At a minimum, the following condition of approval (COA) will apply:
COA 6 - All pits must be lined.
|
| OGLA | Form: (02A)
400059919
08/18/2010 | Location is in a sensitive area because of close proximity to surface water, therefore, operator must ensure 110 percent secondary containment for any volume of fluids contained at well site during drilling and completion operations.
|
| OGLA | Form: (02A)
400059919
08/18/2010 | Operator must implement best management practices to contain any unintentional release of fluids.
|
| OGLA | Form: (02A)
400059919
08/18/2010 | Reserve pit (or any other pit used to contain/hold fluids) must be lined or a closed loop system (as previously indicated on the Form 2A Permit application by PDC in Section 6. Construction: and Section 15. Comments:) must be implemented during drilling.
|
| OGLA | Form: (02A)
400059919
08/18/2010 | The nearby hillside must be monitored for any day-lighting of drilling fluids throughout the drilling of the surface casing interval.
|
| OGLA | Form: (02A)
400059919
08/18/2010 | Operator must ensure 110 percent secondary containment for any volume of fluids contained at well site during drilling and completion operations. If fluids are conveyed via pipeline, operator must implement best management practices to contain any unintentional release of fluids.
|
| OGLA | Form: (02A)
400059919
08/18/2010 | The moisture content of any drill cuttings in a cuttings pit, trench, or pile shall be as low as practicable to prevent accumulation of liquids greater than de minimis amounts. At the time of closure, the drill cuttings must also meet the applicable standards of table 910-1.
|
| OGLA | Form: (02A)
400059919
08/18/2010 | No portion of any pit that will be used to hold liquids shall be constructed on fill material, unless the pit and fill slope are designed and certified by a professional engineer, subject to review and approval by the director prior to construction of the pit. The construction and lining of the pit shall be supervised by a professional engineer or their agent. The entire base of the pit must be in cut.
|