COAs

Skip to Main Content

Facility Type	Facility ID/ API	Facility Name/ Number	Operator Name/ Number	Status	Field Name/ Number	Location	Location ID	Related Facilities
WELL	05-123-38072	File 3G-32H-K268	CRESTONE PEAK RESOURCES OPERATING LLC 10633	PR 8/27/2018	WATTENBERG 90750	FREDERICK/WELD 123 NESW 32 2N68W 6	434248

COGIS - Conditions of Approval Results

Type	Source Document	Conditions of Approval
Permit	Form: (02 ) 400445650 8/19/2013	Operator must meet water well testing requirements per Rule 318A.
Engineer	Form: (02 ) 400445650 9/12/2013	1) Submit Form 42 electronically to COGCC 48 hours prior to MIRU.. 2) Comply with Rule 317.i and provide cement coverage from end of 7” casing to a minimum of 200' above Niobrara and from 200’ below Shannon to 200’ above Sussex. Verify coverage with cement bond log. 3) Comply with Rule 321. Run and submit Directional Survey from TD to base of surface casing. Ensure that the wellbore complies with setback requirements in commission orders or rules prior to producing the well.
Engineer	Form: (04 ) 401352280 9/30/2017	Comply with Rule 317.j. and provide cement coverage from TD to a minimum of 200' above Niobrara and from 200’ below Shannon to 200’ above Sussex. Verify coverage with cement bond log.
Engineer	Form: (04 ) 401352280 9/30/2017	Bradenhead tests shall be performed according to the following schedule and the Form 17 submitted within 10 days of each test: 1) Within 60 days of rig release and prior to stimulation and 2) If a delayed completion, 6 months after rig release and prior to stimulation. 3) Within 30 days after first production, as reported on Form 5A.
Engineer	Form: (04 ) 401352280 9/30/2017	Offset well evaluation will be performed on new APDs (401352054, 401352057) on this pad and mitigation COAs will be attached to this permit prior to stimualtion of this well.

COGIS - Best Management Practice Results

BMP Type	Source Document	Best Management Practices
Drilling/Completion Operations	Form: (02 ) 400445650 9/17/2013	Prior to drilling operations, Operator will perform an anti-collision scan of existing offset wells that have the potential of being within close proximity of the proposed well. This anti-collision scan will include definitive MWD or gyro surveys of the offset wells with included error of uncertainty per survey instrument, and compared against the proposed wellpath with its respective error of uncertainty. If current surveys do not exist for the offset wells, Operator may have gyro surveys conducted to verify bottomhole location. The proposed well will only be drilled if the anti-collision scan results indicate that there is not a risk for collision, or harm to people or the environment. For the proposed well, upon conclusion of drilling operations, an as-constructed gyro survey will be submitted to COGCC with the Form 5.
Drilling/Completion Operations	Form: (02 ) 400445650 9/17/2013	Encana will comply with the “COGCC Policy for Bradenhead Monitoring During Hydraulic Fracturing Treatments in the Greater Wattenberg Area”, dated May 29, 2012.
Drilling/Completion Operations	Form: (04 ) 401352280 9/30/2017	Surface casing set based on a two string design, plans have switched to a single string design after well was spud – current requirements for single string design horizontal wells in the DJ basin require a minimum 1500’ surface casing – operator acknowledges and will provide additional contingencies Crestone Peak Resources Operating LLC Drilling Plan: Drill File 32H-K268 Pad wells as 2-casing string wells, set wellhead capable of handling 7” intermediate casing, perform FITs to 13.5ppg on all existing surface casing shoes, drill upper hole to lateral land with 8.75” OH / able to run 7” csg if needed. Drill Lateral with RSS Tool in 8.5” OH to TD per directional plans, all wells.