COAs

Skip to Main Content

Facility Type	Facility ID/ API	Facility Name/ Number	Operator Name/ Number	Status	Field Name/ Number	Location	Location ID	Related Facilities
WELL	05-123-36764	CANNON 16N-3HZ	KERR MCGEE OIL & GAS ONSHORE LP 47120	PR 11/11/2013	WATTENBERG 90750	WELD 123 NENE 3 2N66W 6	327393

COGIS - Conditions of Approval Results

Type	Source Document	Conditions of Approval
Engineer	Form: (02) 400354940 01/15/2013	1)Provide notice of MIRU via an electronic Form 42. 2)Comply with Rule 317.i and provide cement coverage to a minimum of 200' above the Niobrara. Verify cement coverage with a cement bond log per 317.o.
Engineer	Form: (02) 400354940 01/15/2013	Kerr McGee acknowledges the proximity of Nobel’s well Cannon Red W #3-4D API# 123-16278 to Kerr McGee’s proposed well the Cannon 16C-3HZ (doc #400354743) and Cannon 16N-3HZ (doc# 400354940). Kerr McGee shall undertake necessary mitigation measures to prevent groundwater contamination from the above identified offset wells in the drilling and completion of proposed well. Through review of the APD, should Commission staff identify offset wells that raise reasonable concerns related to any offset well(s)’ wellbore integrity’s ability to preserve formation isolation, but which are not owned or operated by Kerr McGee, Kerr McGee shall notify and use best efforts to work with the offset well operator(s) for purposes of implementing necessary mitigation measures to minimize risk of groundwater contamination.
Permit	Form: (02) 400354940 01/18/2013	Operator must meet water well testing requirements per Rule 318A.
Engineer	Form: (04) 400587307 04/09/2014	Please submit form 17 for previous tests and after each new test.
Engineer	Form: (04) 402480883 09/08/2020	Operator shall continue to monitor pressure, and report to COGCC through annual test reporting.
Engineer	Form: (04) 403017653 04/27/2022	Operator shall continue to monitor pressure, and report to COGCC through annual testing. If monitored well conditions meet the thresholds defined by Order 1-232 a new bradenhead test and sundry must be filed.

COGIS - Best Management Practice Results

BMP Type	Source Document	Best Management Practices
Drilling/Completion Operations	Form: (02 ) 400354940 2/11/2013	“Prior to drilling operations, Operator may perform an anti-collision review of existing offset wells that have the potential of being within close proximity of the proposed well. This anti-collision review may include MWD or gyro surveys and surface locations of the offset wells with included error of uncertainty per survey instrument, and compared against the proposed wellpath with its respective error of uncertainty. If current surveys do not exist for the offset wells, Operator may have gyro surveys conducted to verify bottomhole location. The proposed well may only be drilled if the anti-collision review results indicate that the risk of collision is sufficiently low as defined by the anti-collision plan, with separation factors greater than 1.5, or if the risk of collision has been mitigated through other means including shutting in wells, plugging wells, increased drilling fluid in the event of lost returns or as is appropriate for the specific situation. In the event of an increased risk of collision, that risk will be mitigated to prevent harm to people, the environment or property. For the proposed well, upon conclusion of drilling operations, an as-constructed directional survey will be submitted to COGCC with the Form 5.” At the time of permitting; the operator has identified the following well(s) as being within close proximity of the proposed well: CANNON 16N-3HZ: - UPRR 38 PAN AM G 2
Drilling/Completion Operations	Form: (02 ) 400354940 2/11/2013	Kerr McGee acknowledges and will comply with the COGCC Policy for Bradenhead Monitoring during Hydraulic Fracturing Treatments in the Greater Wattenberg Area dated May 29, 2012.