COAs

Skip to Main Content

Facility Type	Facility ID/ API	Facility Name/ Number	Operator Name/ Number	Status	Field Name/ Number	Location	Location ID	Related Facilities
WELL	05-123-36138	REIGLE 28N-4HZ	KERR MCGEE OIL & GAS ONSHORE LP 47120	PR 10/1/2022	WATTENBERG 90750	WELD 123 SWSE 4 2N65W 6	332111

COGIS - Conditions of Approval Results

Type	Source Document	Conditions of Approval
Engineer	Form: (02 ) 400325349 9/18/2012	1)Provide notice of MIRU via an electronic Form 42. 2)Comply with Rule 317.i and provide cement coverage from the 7” casing TD to a minimum of 200' above the Niobrara and from 200’ below Sussex to 200’ above Sussex. Verify coverage with a cement bond log.
Engineer	Form: (02 ) 400325349 9/18/2012	Stimulation of this well may not take place until: the Plugging and Abandonment work (or other remediation approved by the COGCC) takes place for the Jerald L Stugart Unit #2 (API# 123-09900) well, this work is captured on the appropriate report (i.e. Form 6 Subsequent Report of Abandonment), and that report is submitted to and approved by the COGCC.
Permit	Form: (02 ) 400325349 9/21/2012	Operator must meet water well testing requirements per Rule 318A.
Engineer	Form: (04 ) 402636387 4/5/2021	Operator shall continue to monitor pressure, and report to COGCC through annual testing. If monitored well conditions meet the thresholds defined by Order 1-232 a new bradenhead sundry must be filed.
Engineer	Form: (04 ) 402636387 4/5/2021	If bradenhead pressures return, collect bradenhead and production gas samples for laboratory analysis. Sampling will comply with Operator Guidance - Bradenhead Testing and Reporting Instructions, Appendix A: Liquid and Gas Sampling. Copies of all final laboratory analytical results will be provided to the COGCC within three months of collecting the samples

COGIS - Best Management Practice Results

BMP Type	Source Document	Best Management Practices
Drilling/Completion Operations	Form: (02 ) 400325349 10/4/2012	“Prior to drilling operations, Operator may perform an anti-collision review of existing offset wells that have the potential of being within close proximity of the proposed well. This anti-collision review may include MWD or gyro surveys and surface locations of the offset wells with included error of uncertainty per survey instrument, and compared against the proposed wellpath with its respective error of uncertainty. If current surveys do not exist for the offset wells, Operator may have gyro surveys conducted to verify bottomhole location. The proposed well may only be drilled if the anti-collision review results indicate that the risk of collision is sufficiently low as defined by the anti-collision plan, with separation factors greater than 1.5, or if the risk of collision has been mitigated through other means including shutting in wells, plugging wells, increased drilling fluid in the event of lost returns or as is appropriate for the specific situation. In the event of an increased risk of collision, that risk will be mitigated to prevent harm to people, the environment or property. For the proposed well, upon conclusion of drilling operations, an as-constructed directional survey will be submitted to COGCC with the Form 5.” At the time of permitting; the operator has identified the following well(s) as being within close proximity of the proposed well: REIGLE 28N-4HZ: - GLADYS JACCARDI GU 1 - MOSER 37-4 - MOSER 23-4 - MOSER 19-4 - MOSER 34-4 - REIGLE 17-4X - REIGLE 31-4 - REIGLE 32-4 - REIGLE 24-4 - MOSER 33-4 - MOSER 35-4 - MOSER 36-4 - REIGLE 18-4 - HAYMAKER 36N-4HZ - REIGLE 21-4 - REIGLE 25-4 - REIGLE 22-4
Drilling/Completion Operations	Form: (02 ) 400325349 10/4/2012	Kerr McGee acknowledges and will comply with the COGCC Policy for Bradenhead Monitoring during Hydraulic Fracturing Treatments in the Greater Wattenberg Area dated May 29, 2012.