| Planning | Form: (02A )
401488307
4/19/2018 | All lease roads will be constructed as all-weather roads and will accommodate local emergency vehicle access requirements. Roads will be maintained in a reasonable condition. In addition, Arapahoe County provides site plans to the local fire department and office of emergency management and requires “Will Serve” letters from these emergency services prior to issuing local permits. |
| Planning | Form: (02A )
401488307
4/19/2018 | BROG has included 4 wells on this Location. BROGP develops multi-well pads wherever technically and economically practical to minimize disturbance. |
| Traffic control | Form: (02A )
401488307
4/19/2018 | Traffic control measures will be implemented to include posted speed limits for truck traffic during drilling and completions operations. Operator pays Arapahoe County a traffic impact fee based on the number of wells that will be drilled. In addition, Applicant provides Arapahoe County with a Traffic Impact Report and complies with any recommendations provided by Arapahoe County. |
| General Housekeeping | Form: (02A )
401488307
4/19/2018 | Combustible material will remain a minimum of twenty-five (25) feet from the wellhead, tanks and separator. Electrical equipment inside the bermed area will comply with API RP 500 area classifications and current national electrical code. |
| General Housekeeping | Form: (02A )
401488307
4/19/2018 | All surface trash, debris, scrap or discarded material connected with the operations of the property will be removed from the premises or disposed of in a legal manner. |
| General Housekeeping | Form: (02A )
401488307
4/19/2018 | Operator has attached its waste management plan for review. |
| Material Handling and Spill Prevention | Form: (02A )
401488307
4/19/2018 | Operator has attached its integrity management plan to monitor Production Facilities on a regular schedule to identify fluid leaks. Operator also performs weekly AVO (audio, visual, olfactory) inspections at each site and conducts an in-depth annual lease inspection. The annual inspection is a 126 point inspection thats tests all alarms and shutdown systems, inspects electrical equipment, and provides a checklist for relief valves, pressure vessels, piping, tanks, flares, general houskeeping, safety requirements and SPCC. |
| Material Handling and Spill Prevention | Form: (02A )
401488307
4/19/2018 | Secondary containment for the tank battery will consist of self-contained skirted tank bases, sitting on top of a synthetic liner directly beneath each tank. The berm is located 1010' from the building unit. The berm will be steel and have a bentonite liner. The bermed area will be sufficient to contain one-hundred fifty percent (150%) of the largest single tank. All containment devices will be inspected during weekly AVO and annual lease inspections. Secondary containment will be maintained in good condition. No potential ignition sources will be installed inside the secondary containment area, except for fired vessels. No downgradient surface water feature is located within 500’ of this location. This location is not within a UMA. |
| Material Handling and Spill Prevention | Form: (02A )
401488307
4/19/2018 | Adequate blowout prevention equipment will be used on all well servicing operations. Backup stabbing valves will be present for well servicing operations during reverse circulation. Valves will be pressure tested before each well servicing operation using both low-pressure air and high-pressure fluid. |
| Material Handling and Spill Prevention | Form: (02A )
401488307
4/19/2018 | No pits will be constructed on this location. All tankage in use will have a level indicator device. |
| Material Handling and Spill Prevention | Form: (02A )
401488307
4/19/2018 | All loadlines will be bullplugged or capped. |
| Construction | Form: (02A )
401488307
4/19/2018 | The location will be fenced and the road will be gated to restrict access by unauthorized persons. |
| Construction | Form: (02A )
401488307
4/19/2018 | No guy line anchors will remain on location after drilling operations. |
| Construction | Form: (02A )
401488307
4/19/2018 | All crude oil and condensate storage tanks installed on location will be designed, constructed, and maintained in accordance with National Fire Protection Association (NFPA) Code 30 (2008 version). |
| Noise mitigation | Form: (02A )
401488307
4/19/2018 | Operator will conduct a noise survey prior to construction to ensure that maximum permissible noise levels as measured at the nearest building are not exceeded during normal operations (except for short-term allowable exceedances). If noise exceeds the exterior noise level limits appropriate noise mitigation will be installed. In addition, pursuant to the Memorandum of Understanding between Arapahoe County and Applicant (the “MOU”), Operator will post 24-hour, 7 days per week contact information to deal with all noise complaints arising from Operator’s oil and gas operations, and Applicant will address noise concerns from neighbors on a case-by-case basis. Noise will be monitored throughout all aspects of development and addressed.
Location lighting will be directed downward and inward and shielded so as to avoid glare on public roads and building units within one thousand (1,000) feet.
All noise and light mitigation will be constructed so that it can be installed and removed without disturbing the site or landscaping. |
| Odor mitigation | Form: (02A )
401488307
4/19/2018 | Operator will use closed top pits to contain all oil based mud and the tank farm will be placed approximately 1100’ from the building unit. |
| Drilling/Completion Operations | Form: (02A )
401488307
4/19/2018 | Closed Loop Drilling System will be used during drilling operations. Fresh water storage will be in an MVTL outside of the 1000’ buffer zone, managed and operated by a third party. |
| Drilling/Completion Operations | Form: (02A )
401488307
4/19/2018 | Green Completions will be used on this location. Temporary equipment such as flow lines, separators, and sand traps needed to support green completions will be installed and sized based on expected well productivity as calculated by the highest gas productivity from wells within a 1-mile radius. Flowback combustors will be sized to handle 1.5 times the largest flowback volume of gas experienced in a 10-mile radius. Valves and porting will be installed to divert gas to temporary equipment if needed. Auxiliary fuel will be available to sustain combustion of the gas mixture when the mixture includes non-combustible gases.
Siting of the Location was partly based on the location of the gas sales meters. The gas sales meters are located along the western perimeter of the location providing the shortest potential tie-in to gas offtake. Operator shall tie-into the gas sales meter when saleable gas quntity have been met. |
| Drilling/Completion Operations | Form: (02A )
401488307
4/19/2018 | Blowout preventer equipment will consist of a double ram with blind ram and pipe ram; annular preventer or a rotating head. At least one person on site during drilling operations will have blowout prevention training. |
| Drilling/Completion Operations | Form: (02A )
401488307
4/19/2018 | BOPE will be tested upon initial rig-up and at least once every thirty (30) days during drilling operations thereafter. Pressure testing of the casing string and each component of the blowout prevention equipment including flange connections will be performed to seventy percent (70%) of working pressure or seventy percent (70%) of the internal yield of casing, whichever is less. The pipe rams will be function tested daily. |
| Drilling/Completion Operations | Form: (02A )
401488307
4/19/2018 | Drill stems tests will not be conducted. |
| Final Reclamation | Form: (02A )
401488307
4/19/2018 | Within 90 days after a well is plugged and abandoned, the well site will be cleared of all non-essential equipment, trash, and debris. |
| Final Reclamation | Form: (02A )
401488307
4/19/2018 | Upon abandonment, the operator will identify the location of the wellbore with a permanent monument, inscribed with the well number and date of plugging. |
| Odor mitigation | Form: (04 )
401711617
8/14/2018 | All open top tanks and process equipment containing oil-based mud will be kept more than 1100’ away or more from building unit. |
| Storm Water/Erosion Control | Form: (02A )
402289749
1/13/2021 | Opeartor will install stormwater controls around the perimeter of the location prior to construction and will include a ditch and berm system and a stormwater detention pond. They will remain in place through final reclamation or until pad is stabilized |