| Planning | Form: (02A )
401361827
12/18/2017 | 604c.(2).E. Multi-Well Pads: In order to reduce surface impact, this application is for a 22-well pad. |
| Planning | Form: (02A )
401361827
12/18/2017 | 604c.(2).Q. Guy Line Anchors: Guy line anchors will not be used. Base Beams will be used to stabilize the rig and removed after drilling. |
| Planning | Form: (02A )
401361827
12/18/2017 | 604c.(2).R. Tank Specifications: Two 500 barrel skid-mounted frac tanks will be temporarily placed on-site for use of the pre-spud rig only. One tank will store water and the other will store water based mud.
|
| Planning | Form: (02A )
401361827
12/18/2017 | 604c.(2).S. Access Roads: KMG will utilize a lease access road from CR 8 for drilling, completions, and production operations, including maintenance equipment. The road will be properly constructed and maintained to accommodate for local emergency vehicle access.
|
| Planning | Form: (02A )
401361827
12/18/2017 | 604c.(2).V. Development From Existing Well Pads: Drilling from an existing well pad was not feasible for the development of the wells on this proposed oil and gas location; however, this well pad will be considered for future well locations.
|
| Community Outreach and Notification | Form: (02A )
401361827
12/18/2017 | 305.a.(2) A Notice of Intent to Conduct Operations was sent to each building unit owner within the Exception Zone or Buffer Zone Setback. Anadarko responded to recipients and will continue to communicate with recipients via the public response line (phone number included in NICO notice).
|
| Community Outreach and Notification | Form: (02A )
401361827
12/18/2017 | As a part of planning this proposed location, Kerr-McGee held multi-disciplinary Surface Impact Planning Meetings regarding the impacts and mitigations associated with this proposed location. The toll-free hotline number and email for the Anadarko Colorado Response Line will be posted at the entrance to the lease access road for stakeholders during drilling and completion operations at this proposed location. Courtesy Notifications will be sent to impacted stakeholders prior to drilling operations and again prior to completions operations, providing contact information for the Anadarko Colorado Response Line and online resources.
|
| Traffic control | Form: (02A )
401361827
12/18/2017 | 604c.(2).D. Traffic Plan: Prior to the commencement of operations, the operator will obtain access and ROW permits per Weld County Code and implement COAs or traffic control plans as required.
|
| Traffic control | Form: (02A )
401361827
12/18/2017 | KMG currently plans to use the water-on-demand system on this location which is a network of over 140 miles of underground pipeline that stretches the length of the 20-mile by 30-mile field to source and transport water to completions crews. This system eliminates more than 2,000 truck trips per day, also reducing associated concerns of traffic, noise, emissions and dust. |
| General Housekeeping | Form: (02A )
401361827
12/18/2017 | 604c.(2).O. Loadlines: All loadlines shall be bullplugged or capped.
|
| General Housekeeping | Form: (02A )
401361827
12/18/2017 | 604c.(2).P. Removal of Surface Trash: A commercial size trash bin for removing debris will be located on site. This bin will be for use by all parties affiliated with the operation. Upon completion of operations, the commercial trash bin will be removed from the location and disposed of in an appropriate manner.
|
| General Housekeeping | Form: (02A )
401361827
12/18/2017 | 803. Lighting: To the extent practicable, site lighting shall be shielded and directed downward and inward toward operations to avoid glare on public roads and nearby Building Units. |
| Storm Water/Erosion Control | Form: (02A )
401361827
12/18/2017 | To protect surface water during construction a ditch/berm around the pad and sediment traps will be constructed then lined prior to commencing grading of the well pad location. |
| Material Handling and Spill Prevention | Form: (02A )
401361827
12/18/2017 | 604c.(2).W. Site-Specific Measures: KMG maintains a Storm Water Management Plan that assesses erosion control for every KMG operated location. This location will be added to this plan once construction begins. This site will be inspected every fourteen (14) days during construction activities, every twenty-eight (28) days after construction is completed, and after any major weather event.
|
| Material Handling and Spill Prevention | Form: (02A )
401361827
12/18/2017 | 604c.(2).N. Control of Fire Hazards: KMG and its contractors will employ best management practices during the drilling and production of its wells and facilities and will comply with appropriate COGCC rules concerning safety and fire. KMG will ensure that any material that might be deemed a fire hazard will remain no less than twenty-five (25) feet from the wellhead(s), tanks and separator(s).
|
| Material Handling and Spill Prevention | Form: (02A )
401361827
12/18/2017 | 606.A.d. for flammable liquids near the wellhead – Flammable liquids will not be stored within 50’ of the proposed wellheads. If storage of flammable liquid is to be conducted within 50’ of the wellhead, sufficient safety measure will be implemented. |
| Material Handling and Spill Prevention | Form: (02A )
401361827
12/18/2017 | 604.c.(2)F BMP: 604c.(2).F. Leak Detection Plan: Automation technology will be utilized at this facility. This technology includes the use of fluid level monitoring for the tanks and produced water sumps, high-level shut offs, and electronic sensors to monitor the interstitial space of double-walled produced water sumps. All automation is monitored by Kerr-McGee’s Integrated Operations Center (IOC), which is manned 24 hours per day, 7 days per week. |
| Material Handling and Spill Prevention | Form: (02A )
401361827
12/18/2017 | 604.c(2)G BMP: 604c.(2).G. Berm Construction: A geosynthetic liner will be laid under the tanks on this location and a metal containment will be constructed. Berms or other secondary containment devices will be constructed around crude oil, condensate, and produced water storage tanks and shall enclose an area sufficient to contain and provide secondary containment for 150% of the largest single tank. Berms and other secondary containment devices shall be inspected at scheduled intervals and maintained in good condition |
| Material Handling and Spill Prevention | Form: (02A )
401361827
12/18/2017 | 604.c.(2)R BMP: crude oil and condensate storage tanks shall be designed, constructed, and maintained in accordance with National Fire Protection Association (NFPA) Code 30 (2008 version). written records verifying proper design, construction, and maintenance will be maintained and made available to the COGCC upon request. |
| Dust control | Form: (02A )
401361827
12/18/2017 | 805.c. Dust: Water will be placed on dirt access roads to mitigate dust as needed. If feasible, magnesium chloride will also be used as needed on access roads to further abate dust. |
| Construction | Form: (02A )
401361827
12/18/2017 | 604c.(2).M. Fencing Requirements: The completed wellsites will be surrounded with a fence and gate with adequate lock to restrict access to authorized personnel only. KMG personnel will monitor the wellsites regularly upon completion of the wells. Authorized representatives and/or KMG personnel shall be on-site during drilling and completion operations. |
| Noise mitigation | Form: (02A )
401361827
12/18/2017 | 604c.(2).A. Noise: Sound surveys have been conducted on each rig type and are utilized to anticipate any additional effective noise mitigation once a drilling rig is determined.
|
| Noise mitigation | Form: (02A )
401361827
12/18/2017 | At a minimum, and pending a safety review after construction of the location, sound mitigation barriers (sound wall) will be placed along the south, east sides and along the west side up to the well row to dampen noise and minimize impact to the nearby residences during drilling and completions.
|
| Noise mitigation | Form: (02A )
401361827
12/18/2017 | Should technological advancements allow for better noise mitigation at the time of drilling and completion operations on this location, Kerr-McGee will re-evaluate the most effective method at that time. |
| Odor mitigation | Form: (02A )
401361827
12/18/2017 | 805b. Odors: KMG will comply with the provisions of 805b as deemed applicable. Additional BMPs for THIS location are: 1) the storage of excess drilling fluid (e.g., fluid not being used in the active mud system) in closed, upright tanks; and 2) the use of an odor neutralizer in the active mud system. |