| Planning | Form: (02A )
400468821
11/10/2013 | 604c.(2).A. Noise: This pad location is located in a rural rangeland area. The nearest building unit is located over one mile away. |
| Planning | Form: (02A )
400468821
11/10/2013 | 604c.(2).S. Access Roads: KMG will utilize the lease access road from WCR 20 for drilling operations and maintenance equipment. The road will be properly constructed and maintained to accommodate for local emergency vehicle access.
|
| General Housekeeping | Form: (02A )
400468821
11/10/2013 | 604c.(2).N. Control of Fire Hazards: KMG will ensure that any material that might be deemed a fire hazard will be will remain no less than twenty-five (25) feet from the wellhead(s) |
| General Housekeeping | Form: (02A )
400468821
11/10/2013 | 604c.(2).O. Loadlines: All loadlines shall be bullplugged or capped. |
| General Housekeeping | Form: (02A )
400468821
11/10/2013 | 604c.(2).P. Removal of Surface Trash: A commercial size trash bin for removing debris will be located on site. This bin will be for use by all parties affiliated with the operation. |
| General Housekeeping | Form: (02A )
400468821
11/10/2013 | 604c.(2).Q. Guy Line Anchors: Should guy line anchors be left buried for future use, they shall be identified by a bright marker greater than four (4) feet high and no more than one (1) foot east of the guy line anchor. |
| General Housekeeping | Form: (02A )
400468821
11/10/2013 | 604c.(2).U. Identification of Plugged and Abandoned Wells: Pursuant to rule 319.a.(5)., once the well has been plugged and abandoned, KMG will identify the location of the wellbore with a permanent monument that will detail the well name and date of plugging |
| General Housekeeping | Form: (02A )
400468821
11/10/2013 | 604c.(2).T. Well Site Cleared: The wellsite will be cleared of all non-essential equipment within ninety (90) days after all wells associated with the pad have been plugged and abandoned. |
| Material Handling and Spill Prevention | Form: (02A )
400468821
11/10/2013 | 604c.(2).F. Leak Detection Plan: Automation technology will be utilized at this facility. This technology includes the use of fluid level monitoring for the tanks and produced water sumps, high-level shut offs, and electronic sensors to monitor the interstitial space of double-walled produced water sumps. All automation is monitored by Kerr-McGee’s Integrated Operations Center (IOC,) which is manned 24 hours per day, 7 days per week. |
| Construction | Form: (02A )
400468821
11/10/2013 | 604c.(2).E. Multiwell Pads: This application is part of a five-well pad. |
| Construction | Form: (02A )
400468821
11/10/2013 | 604c.(2).M. No fencing is necessary for this location. |
| Drilling/Completion Operations | Form: (02A )
400468821
11/10/2013 | 604c.(2).B. Closed Loop Drilling System: A closed loop drilling system will be utilized during drilling of the wells on this location. |
| Drilling/Completion Operations | Form: (02A )
400468821
11/10/2013 | 604c.(2).C. Green Completions: KMG will install Vapor Recovery Unit(s) (VRU’s) to prevent uncontrolled venting of flash gas. Environmental Control Devices (ECD) will be used to control working and breathing vapor losses for oil and water tanks. Produced oil and gas will be piped off of location to minimize air pollution. |
| Drilling/Completion Operations | Form: (02A )
400468821
11/10/2013 | 604c.(2).H. BOPE: Our rigs at a minimum will have a double ram with blind and pipe ram; and annular preventer. |
| Drilling/Completion Operations | Form: (02A )
400468821
11/10/2013 | 604c.(2).I. BOPE Testing for Drilling Operations: Upon initial rig-up, BOPE’s will be tested at a minimum of every |
| Drilling/Completion Operations | Form: (02A )
400468821
11/10/2013 | 604c.(2).J. BOPE for Well Servicing Operations: Blowout prevention equipment will be used on any servicing operations associated with this well.
Backup stabbing valves will be used during any future servicing operations during reverse circulation. Valves shall be pressure tested before each well servicing operation using low-pressure air and high-pressure fluid. |
| Drilling/Completion Operations | Form: (02A )
400468821
11/10/2013 | 604c.(2).L. Drill Stem Tests: No drill stem tests will be performed without prior approval from the director. |
| Drilling/Completion Operations | Form: (02A )
400468821
11/10/2013 | 604c.(2).K. Pit Level Indicators:
All mud pits contain pit level monitors with Electronic Drilling Recorders (EDR)
KMG uses an Electronic Drilling Recorder (EDR) with pit level monitor(s) and alarm(s) for production rigs. Basic level gages are used on pits utilized for the surface rig. |