| UIC | Form: (31)
402045353
04/02/2020 | Injection is not authorized until approval of Subsequent Forms 31 and 33.
|
| UIC | Form: (31)
402045353
04/02/2020 | Operator must provide results of Dakota-Lakota injectivity test for Maximum Surface Injection Pressure determination. |
| UIC | Form: (31)
402045353
04/03/2020 | Operator is required to contact COGCC to discuss Step Rate Test or Injectivity Test criteria for Maximum Surface Injection Pressure determination. |
| UIC | Form: (31)
402366561
05/08/2020 | The initial Maximum Daily Injection Rate is limited to 10,000 barrels per day. If operator wishes to inject at a rate higher than 10,000 barrels/day or increase the Maximum Injection Volume permitted here they must contact COGCC and make an application via Form 4-Sundry Notice. Requirements for increased rate will be no seismic activity above Magnitude 2.5 within a 2.5 mile radius of the well as determined by the USGS. COGCC will decide amount of daily injection rate increase based on existing rate and seismic activity. |
| UIC | Form: (31)
402366561
05/08/2020 | If operator requests daily injection rate higher than 10,000 bbl per day they will have to install seismic monitoring equipment and monitor for seismic events. Operator required to contact COGCC at that time to discuss type of equipment, monitoring, and data collection and distribution. |
| UIC | Form: (31)
402366561
05/08/2020 | Within thirty (30) days of the commencement of injection operator is required to file a Form 5A-Completed Interval Report:
a.Notifying COGCC of the initial injection date, and
b.Updating COGCC on the status of the well and formation(s) or injection zone(s) used for Form 7 reporting. |
| UIC | Form: (31)
402366561
05/08/2020 | Operator is required to file a Form 4-Sundry Notice with analysis of injected water collected one year after the initial injection date. Minimum analyses are TDS, major cations, and major anions. Data may also be submitted to COGCC Database in Electronic Data Deliverable (EDD) format. After the initial 1-year analysis, the analysis shall be repeated at five (5) year intervals. |
| UIC | Form: (31)
402366561
05/08/2020 | Operator is required to perform additional Mechanical Integrity Tests ("MITs") at five (5) year intervals starting from the first test date reported here. If the downhole well configuration is changed at any time a new MIT must be passed before the well is returned to injection. All injection well MITs must be witnessed by COGCC. |
| UIC | Form: (31)
402366561
05/08/2020 | Approved Maximum Surface Injection Pressure is 1810 psi. Maximum Injection Volume based on a 1/4-mile radius and the thickness and porosity of the perforated zones is 10,480,630 barrels. The Maximum Daily Injection Rate is limited to 10,000 barrels per day. The Maximum Injection Volume and Daily Injection Rate may be changed at a later date with the approval of the COGCC. Approved injection is in the Dakota and Lakota Formations. |