| Engineer | Form: (02)
403278422
03/08/2023 | 1) Submit Form 42 electronically to COGCC 2 business days prior to MIRU (spud notice) for the first well activity with a rig on the pad and provide 2 business day spud notice via Form 42 for all subsequent wells drilled on the pad.
2) Comply with Rule 408.j. and provide cement coverage from TD to a minimum of 500' above Niobrara and from 500’ below Sussex to 500’ above Sussex. Verify coverage with a cement bond log.
3) Oil based drilling fluid can only be used after all groundwater has been isolated. |
| Engineer | Form: (02)
403278422
03/08/2023 | Operator acknowledges the proximity of the listed wells. Operator agrees to: provide mitigation option 1 or 2 (per the Offset Well Evaluation and Hydraulic Fracturing Operator Guidance Document) to mitigate the situation, ensure all applicable documentation is submitted based on the selected mitigation option chosen, and submit a Form 42 (“OFFSET MITIGATION COMPLETED”) stating that appropriate mitigation occurred and that it has been completed, prior to the hydraulic stimulation of this well.
123-14205 BEEBE DRAW UPRR #42-17
123-08284 ARISTOCRAT ANGUS #1
123-12844 WARDELL B #1
123-13094 WARDELL UPRR #42-7
123-14203 BEEBE DRAW UPRR #32-17
123-16582 ARISTOCRAT ANGUS #22-8
123-16583 ARISTOCRAT ANGUS #21-8
123-16449 ARISTOCRAT ANGUS #13-4
123-22833 ARISTOCRAT ANGUS #1-2-8
123-16450 ARISTOCRAT ANGUS #31-8
123-16577 ARISTOCRAT ANGUS #32-8
123-17306 HSR-RAFALOVICH #14-5
123-17304 HSR-OBORNE #9-5
123-17330 HSR-NILAND #6-5
123-17307 HSR-REAM #15-5
123-14204 BEEBE DRAW UPRR #41-17
123-20502 HSR-REI #3-17A
123-21448 ARISTOCRAT ANGUS #12-8
123-35347 REI H #17-21D
123-35346 REI H #17-30D
123-25886 WARDELL #29-20
123-27291 WARDELL #6-4-7
123-32819 REI #27-17
123-29814 REI H #9-32D
123-18460 UPRC #9-12J5
123-14560 UPRR 22 PAN AM UT/S #2 |
| Engineer | Form: (02)
403278422
03/08/2023 | Operator acknowledges the proximity of the listed wells. Operator assures that this offset will be remediated per the Offset Well Evaluation and Hydraulic Fracturing Operator Guidance Document (option 4). Operator will submit a Form 42 ("OTHER – AS SPECIFIED BY PERMIT CONDITION") stating that appropriate mitigation will be completed, during the hydraulic stimulation of this well. This Form 42 shall be filed 48 hours prior to stimulation. Surface and production casing pressures of this offset well will be actively monitored during stimulation of this well. Operator will assure that the offset well’s bradenhead is monitored via pressure transducer during the entire stimulation treatment of this pad. If there is indication of communication between the stimulation treatment and an offset well, treatment will be stopped and COGCC Engineering notified.
123-48520 Harvey #4N |
| Engineer | Form: (02)
403278422
03/08/2023 | Per COGCC Order 1-232, Bradenhead tests shall be performed according to the following schedule and Form 17 submitted within 10 days of each test:
1) Within 60 days of rig release, prior to stimulation. If any pressure greater than 200 psi is observed or if there is continuous flow, Operator must contact COGCC engineering for approval prior to stimulation.
2) If a delayed completion, a second test is required between 6-9 months after rig release and must be conducted prior to stimulation. If any pressure greater than 200 psi is observed or if there is continuous flow, Operator must contact COGCC engineering for approval prior to stimulation.
3) A post-production test within 60 days after first sales, as reported on the Form 10, Certificate of Clearance. |
| Permit | Form: (02)
403278422
04/04/2023 | Operator will log two (2) wells during the first rig occupation with open-hole resistivity log with gamma-ray log from the kick-off point into the surface casing for the two stratigraphically deepest wells on each side of the pad. |
| Permit | Form: (02)
403632799
12/21/2023 | Operator will log two (2) additional wells during the first rig occupation with open-hole resistivity log with gamma-ray log from the kick-off point into the surface casing for the two stratigraphically deepest wells on each side of the pad for a total of three wells logged. |
| Engineer | Form: (02)
403632799
12/21/2023 | Per Order 1-232, Bradenhead tests shall be performed according to the following schedule and Form 17 submitted within 10 days of each test:
1) Within 60 days of rig release, prior to stimulation. If any pressure greater than 200 psi is observed or if there is continuous flow, Operator must contact ECMC engineering for approval prior to stimulation.
2) If a delayed completion, a second test is required between 6-9 months after rig release and must be conducted prior to stimulation. If any pressure greater than 200 psi is observed or if there is continuous flow, Operator must contact ECMC engineering for approval prior to stimulation.
3) A post-production test within 60 days after first sales, as reported on the Form 10, Certificate of Clearance. |
| Engineer | Form: (02)
403632799
12/21/2023 | Operator acknowledges the proximity of the listed well. Operator assures that this offset will be remediated per the Offset Well Evaluation and Hydraulic Fracturing Operator Guidance Document (option 4). Operator will submit a Form 42 ("OTHER – AS SPECIFIED BY PERMIT CONDITION") stating that appropriate mitigation will be completed, during the hydraulic stimulation of this well. This Form 42 shall be filed 48 hours prior to stimulation. Surface and production casing pressures of this offset well will be actively monitored during stimulation of this well. Operator will assure that the offset well’s bradenhead is monitored via pressure transducer during the entire stimulation treatment of this pad. If there is indication of communication between the stimulation treatment and an offset well, treatment will be stopped and ECMC Engineering notified. 123-48520 Harvey #4N |
| Engineer | Form: (02)
403632799
12/21/2023 | Operator acknowledges the proximity of the listed wells. Operator agrees to: provide mitigation option 1 or 2 (per the Offset Well Evaluation and Hydraulic Fracturing Operator Guidance Document) to mitigate the situation, ensure all applicable documentation is submitted based on the selected mitigation option chosen, and submit a Form 42 (“OFFSET MITIGATION COMPLETED”) stating that appropriate mitigation occurred and that it has been completed, prior to the hydraulic stimulation of this well. 123-14205 BEEBE DRAW UPRR #42-17 123-08284 ARISTOCRAT ANGUS #1 123-12844 WARDELL B #1 123-13094 WARDELL UPRR #42-7 123-14203 BEEBE DRAW UPRR #32-17 123-16582 ARISTOCRAT ANGUS #22-8 123-16583 ARISTOCRAT ANGUS #21-8 123-16449 ARISTOCRAT ANGUS #13-4 123-22833 ARISTOCRAT ANGUS #1-2-8 123-16450 ARISTOCRAT ANGUS #31-8 123-16577 ARISTOCRAT ANGUS #32-8 123-17306 HSR-RAFALOVICH #14-5 123-17304 HSR-OBORNE #9-5 123-17330 HSR-NILAND #6-5 123-17307 HSR-REAM #15-5 123-14204 BEEBE DRAW UPRR #41-17 123-20502 HSR-REI #3-17A 123-21448 ARISTOCRAT ANGUS #12-8 123-35347 REI H #17-21D 123-35346 REI H #17-30D 123-25886 WARDELL #29-20 123-27291 WARDELL #6-4-7 123-32819 REI #27-17 123-29814 REI H #9-32D 123-18460 UPRC #9-12J5 123-14560 UPRR 22 PAN AM UT/S #2 |
| Engineer | Form: (02)
403632799
12/21/2023 | Comply with Rule 408.j. and provide cement coverage from TD to a minimum of 500' above Niobrara and from 500’ below Sussex to 500’ above Sussex. Verify coverage with a cement bond log.
Oil based drilling fluid can only be used after all groundwater has been isolated. |
| Engineer | Form: (04)
403870527
08/05/2024 | 1) Provide electronic Form 42 Notice of MIRU 2 business days ahead of operations.
2) Operator shall implement measures to control venting, to protect health and safety, and to ensure that vapors and odors from well operations do not constitute a nuisance or hazard to public welfare.
|
| Engineer | Form: (04)
403988632
11/20/2024 | This well may be returned to annual testing and monthly monitoring. If at any point in the future bradenhead conditions meet thresholds defined by Order 1-232 a new bradenhead mitigation sundry must be filed. |
| Engineer | Form: (04)
404213672
06/04/2025 | 1. Operator will implement measures to control venting, to protect health and safety, and to ensure that vapors and odors from well operations do not constitute a nuisance or hazard to public welfare.
2. Prior to starting bradenhead abatement, if a sample has not been collected within the last twelve months collect bradenhead and production gas samples for laboratory analysis. Sampling will comply with Operator Guidance - Bradenhead Testing and Reporting Instructions, Appendix A: Liquid and Gas Sampling. Copies of all final laboratory analytical results will be provided to the ECMC within three months of collecting the samples.
3. Bradenhead gas is not to be vented to atmosphere; any gas from the Bradenhead will be routed to the specified abatement system. Operator will implement measures to get an initial estimate of the gas flow rate and/or volume from the bradenhead. The abatement program may be used for six consecutive months.
4. Operator will submit a Form 42 (“OTHER”) stating that “bradenhead abatement program has started.”
5. By 10/3/25, conduct a new bradenhead test and submit the Form 17 within ten days of the test and submit a Form 4 Sundry that summarizes current well condition. The sundry should include details of the future plans, flow rate information, pressure data and a discussion of the sample analysis.
Bradenhead pressure shall not exceed threshold pressure (50 psig).
|
| Engineer | Form: (04)
404412641
11/05/2025 | 1. Operator will implement measures to control venting, to protect health and safety, and to ensure that vapors and odors from well operations do not constitute a nuisance or hazard to public welfare.
2. Bradenhead gas is not to be vented to the atmosphere; any gas from the Bradenhead will be routed to the specified abatement system. Shut in bradenhead pressure shall not exceed threshold pressure. Operator will implement measures to get an estimate of the gas flow rate and/or volume from the bradenhead.
3. No later than 9/29/26, conduct a bradenhead test, submit a Form 17, and submit a Form 4 Sundry that summarizes current well condition. The well should be shut in for seven days to monitor and collect data to characterize build up pressures prior to conducting the bradenhead test. The sundry should include details of the future plans, sample analysis interpretation, bradenhead test description, and the flow rate information and pressure data.
4. If a sample has not been collected from surface casing within the last twenty-four months collect bradenhead gas samples for laboratory analysis. Sampling will comply with Operator Guidance - Bradenhead Testing and Reporting Instructions, Appendix A: Liquid and Gas Sampling. Copies of all final laboratory analytical results will be provided to the ECMC within three months of collecting the samples.
|