COAs

Skip to Main Content

Facility Type	Facility ID/ API	Facility Name/ Number	Operator Name/ Number	Status	Field Name/ Number	Location	Location ID	Related Facilities
WELL	05-123-42456	GUEST 29N-25HZ	KERR MCGEE OIL & GAS ONSHORE LP 47120	PR 12/1/2023	WATTENBERG 90750	WELD 123 NESW 13 2N65W 6	331598

COGIS - Conditions of Approval Results

Type	Source Document	Conditions of Approval
Engineer	Form: (02) 400867940 11/17/2015	1) Submit Form 42 electronically to COGCC 48 hours prior to MIRU. 2) Comply with Rule 317.j and provide cement coverage from end of 5.5” casing to a minimum of 200' above Niobrara and from 200’ below the Sussex to 200’ above Sussex. Verify coverage with cement bond log.
Engineer	Form: (02) 400867940 11/17/2015	Operator acknowledges the proximity of the listed wells. Operator agrees to: provide mitigation option 2 (per the DJ Basin Horizontal Offset Policy) to mitigate the situation, ensure all applicable documentation is submitted based on the selected mitigation option chosen, and submit a Form 42 (“OFFSET MITIGATION COMPLETED”) stating that appropriate mitigation occurred and that it has been completed, prior to the hydraulic stimulation of this well. Harkis USX X 13-7 API#123-08154; Harkis USX X 13-4 API#123-09825
Engineer	Form: (04) 401177437 01/20/2017	This Form 4 makes changes to the casing and cementing program approved on the Form 2 and must be displayed with the Form 2 while drilling. Bradenhead tests shall be performed according to the following schedule and the Form 17 submitted within 10 days of each test: 1) Within 60 days of rig release and prior to stimulation and 2) If a delayed completion, 6 months after rig release and prior to stimulation. 3) Within 30 days after first production, as reported on Form 5A.
Engineer	Form: (04) 403470443 08/31/2023	1) Provide electronic Form 42-Other ("Surfactant Treatment") two business days ahead of operations. 2) During treatment operations, the operator will monitor the bradenhead annulus and casing pressures of the wellbore being treated. 3) If there is any reason to suspect a potential downhole failure during treatment operations, stop treatment and contact ECMC engineering. 4) The Operator will submit the Form 5A, Completed Interval Report within 30 days after the following operations:

COGIS - Best Management Practice Results

BMP Type	Source Document	Best Management Practices
Planning	Form: (02 ) 400867940 11/20/2015	This proposed oil and gas location is located in a rural rangeland area. The nearest building unit is located 1412’ away.
Drilling/Completion Operations	Form: (02 ) 400867940 11/20/2015	317.p Logging Program: One of the first wells drilled on the pad will be logged with Cased-hole Pulsed Neutron Log with Gamma Ray Log from TD into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on production casing (or on intermediate casing if production liner is run) into the surface casing. The horizontal portion of every well will be logged with a measured-while-drilling gamma-ray log. The Form 5, Completion Report, for each well on the pad will list all logs run in that well and have those logs attached. The Form 5 for each well shall clearly state “No open-hole logs were run” and shall reference the Rule 317.p Exception granted for the well.
Drilling/Completion Operations	Form: (02 ) 400867940 11/20/2015	Kerr McGee acknowledges and will comply with the COGCC Policy for Bradenhead Monitoring during Hydraulic Fracturing Treatments in the Greater Wattenberg Area dated May 29, 2012.
Drilling/Completion Operations	Form: (02 ) 400867940 11/20/2015	Anti-Collision: Kerr-McGee will perform an anti-collision evaluation of all active (producing, shut in, or temporarily abandoned) offset wellbores that have the potential of being within one hundred fifty (150) feet of a proposed well prior to drilling operations for the proposed well. Notice shall be given to all offset operators within one hundred fifty (150) feet prior to drilling.