COAs

Skip to Main Content

Facility Type	Facility ID/ API	Facility Name/ Number	Operator Name/ Number	Status	Field Name/ Number	Location	Location ID	Related Facilities
WELL	05-123-41783	Horsetail Fed 07F-0639	FUNDARE RESOURCES OPERATING COMPANY LLC 10773	PR 8/1/2017	DJ HORIZONTAL CODELL 16948	WELD 123 SENW 7 10N57W 6	442284

COGIS - Conditions of Approval Results

Type	Source Document	Conditions of Approval
Engineer	Form: (02 ) 400841360 6/16/2015	1) Provide 48 hour notice of MIRU via electronic Form 42. 2) Set 1800' of surface casing. (Base of Upper Pierre aquifer is deeper than proposed 1600’ surface casing. 1780’ in offset 123-05789, gs 4945’). 3) Provide cement coverage to a minimum of 200' above Niobrara. Verify coverage with cement bond log. 4) Run and submit Directional Survey from TD to base of surface casing. Ensure that the wellbore complies with setback requirements in commission orders or rules prior to producing the well.
Engineer	Form: (04 ) 402412529 6/22/2020	Form 17, 402262177, from 12/12/19 reported bradenhead pressure of 398 psi that blew down to 25 psi with continuous flow and that samples were taken. To date the analytical results are not appearing in the COGCC database, please submit results by 7/22/2020.
Engineer	Form: (04 ) 402412529 6/22/2020	1. Operator shall implement measures to control venting, to protect health and safety, and to ensure that vapors and odors from well operations do not constitute a nuisance or hazard to public welfare. 2. Prior to starting bradenhead mitigation, if a sample has not been collected within the last twelve months collect bradenhead and production gas samples for laboratory analysis. Sampling shall comply with Operator Guidance - Bradenhead Testing and Reporting Instructions, Appendix A: Liquid and Gas Sampling. Copies of all final laboratory analytical results shall be provided to the COGCC within three months of collecting the samples. 3. Operator shall implement measures to get an initial estimate of the gas flow rate and/or volume from the bradenhead. During the shut-in period record pressure data to adequately characterize the build-up. This mitigation plan may be used for six consecutive months from the test date on the Form 17, 12/12/2019. 4. At the conclusion of the six months (6/12/2020), conduct a new bradenhead test and submit the Form 17 within ten days of the test and submit a Form 4 Sundry that summarizes current well condition. The sundry should include details of the future plans and the flow rate information and pressure data.
Engineer	Form: (04 ) 402588471 3/4/2021	Sundry lacks detail of work to date. Gas analysis submitted 2/4/2021 (samples date of 12/2/2020) indicates the bradenhead gas to be thermogenic in origin. Operator to submit a mitigation plan based on these results.
Engineer	Form: (04 ) 402815098 12/19/2022	Bradenhead pressure mitigation via production facilities planned for Q3 2021. The results of this mitigation to date as well as the annual bradenhead test and gas sample analysis for 2022 are due by 12/31/22. The results should be summited via sundry and are to include volumes, rates and pressures maintained on the bradenhead in addition to a summary of the monthly monitoring data.

COGIS - Best Management Practice Results

BMP Type	Source Document	Best Management Practices
Planning	Form: (02 ) 400841360 6/30/2015	Wells Planned within 1500 feet are shown on the multi-well plan map.
Storm Water/Erosion Control	Form: (02 ) 400841360 6/30/2015	Stormwater management plans (SWMP) are in place to address construction, drilling and operations associated with oil and gas development throughout the State of Colorado. BMPs will be constructed as necessary to prevent stormwater from leaving the construction site. BMPs used will vary according to the location, and will remain until the pad is reclaimed.
Material Handling and Spill Prevention	Form: (02 ) 400841360 6/30/2015	Spill Prevention Control and Countermeasures (SPCC) plans are in place to address any possible spill associated with oil and gas operations throughout the State of Colorado. • Materials and fluids will be stored in a neat and orderly fashion. • Waste will be collected regularly and disposed of at an offsite facility. • Prompt cleanup is required of spills to minimize waste materials entering the stormwater runoff. • Drip pans will be used during fueling and maintenance to contain spills or leaks. • Cleanup of trash and discarded material will be done at the end of the work day. • Cleanup will consist of monitoring the road, location and any other work areas. • Material to be cleaned up includes trash, scrap, and contaminated soil.
Drilling/Completion Operations	Form: (02 ) 400841360 6/30/2015	One of the first wells drilled on the pad will be logged with an open-hole resistivity log with gamma-ray from TD to into the surface casing. All wells on the pad will have a cement bond log with gamma-ray run on the production casing (or intermediate casing if production liner is run). All wells on the pad will have the horizontal portion of the wellbore logged with a measured-while-drilling log with gamma-ray. The Form 5, Completion Report, for each well on the pad will list all logs run and have those logs attached. The Form 5 for a well without open-hole logs shall clearly state “No open-hole logs were run.” The Form 5 for a well without open-hole logs shall clearly identify (by API#, well name &number) the well in which open-hole logs were run.