| Planning | Form: (02 )
400694842
10/31/2014 | Multi-well Pads. It is a multi-well pad located in a manner which allows for resource
extraction while maintaining the highest distances possible from the offsetting
residential areas. |
| Traffic control | Form: (02 )
400694842
10/31/2014 | Access roads. The access road will be constructed to accommodate local emergency
vehicles. This road will be maintained for access at all times. |
| Material Handling and Spill Prevention | Form: (02 )
400694842
10/31/2014 | Berm construction. Tank berms shall be constructed of steel rings with a synthetic or
engineered liner and designed to contain 150% of the capacity of the largest tank. All
berms will be visually checked periodically to ensure proper working condition. |
| Material Handling and Spill Prevention | Form: (02 )
400694842
10/31/2014 | Load-lines. All load-lines shall be bull-plugged or capped. |
| Material Handling and Spill Prevention | Form: (02 )
400694842
10/31/2014 | Tank specifications. Tanks will be designed, constructed and maintained in
accordance with NFPA Code 30. The tanks are visually inspected once a day for
issues, and recorded inspections are conducted once a month. |
| Noise mitigation | Form: (02 )
400694842
10/31/2014 | Lighting abatement measures shall be implemented, including the installation lighting
shield devices on all of the more conspicuous lights, low density sodium lighting where
practicable; and rig shrouding is not believed necessary as this is an industrial area
and the only building unit within 1,000' is owned by the operator, however, at its
election the operator may install temporary engineering controls consisting of
perimeter sound walls shall be used on the location during drilling and completion
activities to provide noise relief. Permanent equipment on location shall be muffled to
reduce noise, or shall be appropriately buffered. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Closed Loop Drilling Systems – Pit Restrictions. Not applicable; a closed-loop system
will be used for drilling. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Green Completions – Emission Control Systems. Test separators and associated flow
lines and sand traps shall be installed on-site to accommodate Green completions
techniques pursuant to COGCC Rules. In the anticipated absence of a viable gas
sales line, the flow-back gas shall be thermally oxidized in an emissions control device
(ECD), which will be installed and kept in operable condition for least the first 90-days
of production pursuant to CDPHE rules. This ECD shall have an adequate capacity for
1.5 times the largest flow-back within a 10 mile radius, will be flanged to route gas to
other or permanent oxidizing equipment and shall be provided with the equipment
needed to maintain combustion where non-combustible gases are present. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Blowout preventer equipment (“BOPE”). A double ram and annular preventer will be
used during drilling. At least the drilling company shall have a valid well blowout
prevention certifications. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | BOPE for well servicing operations. Adequate BOP equipment shall be used. Stabbing
valves shall be installed in the event of reverse circulation and shall be prior tested
with low and high pressure fluid. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Pit level indicators. Not applicable; a closed-loop system will be used and no pits shall
be dug. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Drill stem tests. Not applicable; no Drill Stem tests are planned. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Well will be logged with an open hole logging tool with gamma ray. A CBL will be run
on all production casing or, in the case of a production liner, the intermediate casing,
when these casing strings are run. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Control of fire hazards. All materials which are considered fire hazards shall be a
minimum of 25’ from the wellhead tanks or separators. Electrical equipment shall
comply with API RP 500 and will comply with the current national electrical code. An
emergency response plan has been generated for this site. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Guy line anchors. All guy line anchors shall be brightly marked pursuant to Rule 604.c
(2)Q. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Operator acknowledges and will comply with the COGCC Policy for Bradenhead
Monitoring during Hydraulic Fracturing Treatments in the Greater Wattenberg Area
dated May 29, 2012. |
| Drilling/Completion Operations | Form: (02 )
400694842
10/31/2014 | Prior to drilling operations, Operator may perform an anti-collision review of existing
offset wells that have the potential of being within close proximity of the proposed well.
This anti-collision review may include MWD or gyro surveys and surface locations of
the offset wells with included error of uncertainty per survey instrument, and compared
against the proposed wellpath with its respective error of uncertainty. If current surveys
do not exist for the offset wells, Operator may have gyro surveys conducted to verify
bottomhole location. The proposed well may only be drilled if the anti-collision review
results indicate that the risk of collision is sufficiently low as defined by the anticollision
plan, with separation factors greater than 1.5, or if the risk of collision has
been mitigated through other means including shutting in wells, plugging wells,
increased drilling fluid in the event of lost returns or as is appropriate for the specific
situation. In the event of an increased risk of collision, that risk will be mitigated to
prevent harm to people, the environment or property. For the proposed well, upon
conclusion of drilling operations, an as-constructed directional survey will be submitted
to COGCC with the Form 5.
Please see the attached 318A.m letter for a list of well(s) identified by the operator as
being within 150 feet of the proposed well(s). If no letter is attached, the operator has
not identified any wells as being within 150 feet of the proposed well(s) at the time of
permitting. |
| Final Reclamation | Form: (02 )
400694842
10/31/2014 | Well site cleared. Within 90-day subsequent to the time of plugging and abandonment
of the entire site, superfluous debris and equipment shall be removed from the site. |
| Final Reclamation | Form: (02 )
400694842
10/31/2014 | Identification of plugged and abandoned wells. P&A’d wells shall be identified pursuant
to 319.a.(5). |