| Engineer | Form: (02 )
400468021
8/29/2013 | 1) Provide 48 hour notice prior to spud via electronic Form 42.
2) Provide cement coverage to a minimum of 200' above Niobrara. Verify coverage with cement bond log.
3) Run and submit Directional Survey from TD to base of surface casing. Ensure that the wellbore complies with setback requirements in commission orders or rules prior to producing the well.
|
| Engineer | Form: (04 )
402413176
6/26/2020 | Form 17, Doc #402262358, from 12/10/19 reported bradenhead pressure of 60 psi that blew down to a whisper and that samples were taken. To date the analytical results are not appearing in the COGCC database, please submit results by 7/22/2020. |
| Engineer | Form: (04 )
402413176
6/26/2020 | 1. Operator shall implement measures to control venting, to protect health and safety, and to ensure that vapors and odors from well operations do not constitute a nuisance or hazard to public welfare.
2. Prior to starting bradenhead mitigation, if a sample has not been collected within the last twelve months collect bradenhead and production gas samples for laboratory analysis. Sampling shall comply with Operator Guidance - Bradenhead Testing and Reporting Instructions, Appendix A: Liquid and Gas Sampling. Copies of all final laboratory analytical results shall be provided to the COGCC within three months of collecting the samples.
3. Operator shall implement measures to get an initial estimate of the gas flow rate and/or volume from the bradenhead. During the shut-in period record pressure data to adequately characterize the build-up. This mitigation plan may be used for six consecutive months from the test date reported on the Form 17.
4. At the conclusion of the six months (6/10/2020), conduct a new bradenhead test and submit the Form 17 within ten days of the test and submit a Form 4 Sundry that summarizes current well condition. The sundry should include details of the future plans and the flow rate information and pressure data.
Shut in bradenhead pressure shall not exceed 50 psig.
|
| Engineer | Form: (04 )
402690916
12/19/2022 | Bradenhead pressure mitigation via production facilities planned for Q3 2021. The results of this mitigation to date as well as the annual bradenhead test and gas sample analysis for 2022 are due by 12/31/22. The results should be summited via sundry and
are to include volumes, rates and pressures maintained on the bradenhead in addition to a summary of the monthly monitoring data. |