Skip to Main Content

COGIS DB

 
Facility TypeFacility ID/
API
Facility Name/
Number
Operator Name/
Number
StatusField Name/
Number
LocationLocation IDRelated Facilities
WELL05-123-34029GOBBLER
1C-23HZ
KERR MCGEE OIL & GAS ONSHORE LP
47120
TA
4/6/2021
WATTENBERG
90750
WELD  123
SESE 23 2N66W 6
424427View Related
 
COGIS - Conditions of Approval Results
TypeSource DocumentConditions of Approval
EngineerForm: (02)
400174348
07/18/2011
1) Provide 24 hour notice of MIRU to Jim Precup at 303-469-1902 or e-mail at james.precup@state.co.us 2) Comply with Rule 317.i and provide cement coverage from end of 7" production casing to a minimum of 200' above Niobrara and from 200’ below Sussex to 200’ above Sussex. Verify coverage with cement bond log. 3) Comply with Rule 321. Run and submit Directional Survey from TD to base of surface casing. Ensure that the wellbore complies with setback requirements in commission orders or rules prior to producing the well.
EngineerForm: (04)
402263889
12/23/2019
A new application must be made before August 8, 2020. Updates for the planned utilization of the well should be included with the application. The Form 7 reporting must reflect the well status dates reported on the Form 4-TA request.
EngineerForm: (04)
402658716
04/27/2022
Effective April 30, 2022 this well will be designated inactive and must be properly returned to production, plugged and abandoned, have an approved Form 5B or added to a Form 6A list no later than November 1, 2022.
 
COGIS - Best Management Practice Results
BMP TypeSource DocumentBest Management Practices
Drilling/Completion OperationsForm: (02 )
400174348
7/23/2011
During the fracing of this Gobbler horizontal well, Kerr-McGee will shut in the UPRR 38 Pan Am M True 1 well and monitor the casing pressure of this well for a period of 24-hours and report this casing pressure to the COGCC staff via a sundry. Additionally, Kerr-McGee will notify Noble Energy in advance of the estimated completion date of this horizontal well and encourage them to shut in the five Arrowhead Farm wells located within 1000' and monitor the casing and tubing pressure during completion. However, if Kerr-McGee decides to use this UPRR 38 Pam Am M True 1 well for microseismic monitoring then the casing pressure will be reported as a monthly average before and a monthly average after the frac and be noted that it is reported as a monthly average in the submitted sundry.