| Engineer | Form: (02)
400071231
07/27/2010 | 1) Provide 24 hour notice of MIRU to Bo Brown at 970-397-4124 or e-mail at bo.brown@state.co.us.
2) Comply with Rule 317.i and provide cement coverage from TD to a minimum of 200' above Niobrara and from 200’ below Shannon to 200’ above Sussex. Verify coverage with cement bond log.
3) Comply with Rule 321. Run and submit Directional Survey from TD to base of surface casing. Ensure that the wellbore complies with setback requirements in commission orders or rules prior to producing the well. |
| Engineer | Form: (04)
401401196
02/06/2018 | This approval is good for one year and a new application must be made before October 10, 2018(1 year from prior application). Updates for the planned utilization of the well should be included with the application. |
| Engineer | Form: (04)
401897289
01/11/2019 | This approval is good for one year and a new application must be made before October 31, 2019. Updates for the planned utilization of the well should be included with the application.
A Form 5A is required to report all plugs currently downhole which isolate the perforated interval.
The Form 7 reporting must match the actual status of the wellbore. |
| Engineer | Form: (04)
402293078
01/30/2020 | This approval is good for one year and a new application must be made before January 27, 2021. Updates for the planned utilization of the well should be included with the application.
|
| Engineer | Form: (04)
402293078
01/30/2020 | The Form 7 reporting must reflect the well status dates reported on the Form 4-TA request.
|
| Engineer | Form: (04)
402293078
01/30/2020 | Please update production reporting from April, 2017 to present to reflect TA status and not AB, SI, or PR.
|
| Engineer | Form: (04)
401951372
01/30/2020 | This approval is good for one year and a new application must be made before January 27, 2021. Updates for the planned utilization of the well should be included with the application.
|
| Engineer | Form: (04)
401951372
01/30/2020 | The Form 7 reporting must reflect the well status dates reported on the Form 4-TA request.
|
| Engineer | Form: (04)
401951372
01/30/2020 | Please update production reporting from April, 2017 to present to reflect TA status and not AB, SI, or PR.
|
| Engineer | Form: (04)
402558492
07/23/2021 | This approval is good for one year and a new application must be made before December 30, 2021. Updates for the planned utilization of the well should be included with the application.
|
| Engineer | Form: (04)
402558492
07/23/2021 | The Form 7 reporting must reflect the well status dates reported on the Form 4-TA request.
|
| Engineer | Form: (04)
402902391
12/21/2021 | This approval is good for one year and a new application must be made before 12/17/2022. Updates for the planned utilization of the well should be included with the application. |
| OGLA | Form: (06)
403173811
10/05/2022 | Prior to commencing operations, the operator will post signs in conspicuous locations at intersections that will remain in place throughout the duration of the plug and abandonment activities. The signs will indicate plugging and abandonment operations are being conducted, the well name, well, and the applicable contact information. Signs will be placed so as not to create a potential traffic hazard. |
| OGLA | Form: (06)
403173811
10/05/2022 | Due to proximity to a wetland, operator will use secondary containment for all tanks and other liquid containers. Operator will implement stormwater BMPs and erosion control measures as needed to prevent sediment and stormwater runoff from entering the wetland. |
| OGLA | Form: (06)
403173811
10/05/2022 | 3rd party wildlife surveys will be conducted on this well prior to rigging up for P&A activities. |
| Engineer | Form: (06)
403173811
10/10/2022 | 1) Provide electronic Form 42 Notice of MIRU 2 business days ahead of operations and electronic Form 42 Notice of Plugging Operations 48 hours prior to mobilizing for plugging operations. These are two separate notifications, required by Rules 405.e and 405.l.
2) Prior to placing plugs above the base of the UPA: verify that all fluid (liquid and gas) migration has been eliminated. If evidence of fluid migration or pressure remains, contact COGCC Engineer for an update to plugging orders.
3) After isolation has been verified, pump surface casing shoe plug. If surface casing cement is not circulated to surface, shut-in, WOC 4 hours then tag plug – must be at 769’ or shallower and provide a minimum of 10 sx plug at the surface.
4) Leave at least 100’ of cement in the wellbore for each plug without mechanical isolation.
5) With the Form 6 SRA operator must provide written documentation which positively affirms each COA listed above has been addressed.
|
| Engineer | Form: (06)
403173811
10/10/2022 | Consistent with Rule 911.a, a Form 27 must be approved prior to cut and cap, conducting flowline abandonment, or removing production equipment. Allow 30 days for Director review of the Form 27; include the Form 27 document number on the Form 44 for offsite flowline abandonment (if applicable) and on the Form 6 Subsequent.
Properly abandon flowlines per Rule 1105. If flowlines will be abandoned in place, include with the Form 27: pressure test results conducted in the prior 12 months as well as identification of any document numbers for a COGCC Spill/Release Report, Form 19, associated with the abandoned line. |
| Engineer | Form: (06)
403173811
10/10/2022 | Operator shall implement measures to control venting, to protect health and safety, and to ensure that vapors and odors from well plugging operations do not constitute a nuisance or hazard to public welfare. |
| Engineer | Form: (06)
403173811
10/10/2022 | Prior to starting plugging operations a bradenhead test shall be performed if there has not been a reported bradenhead test within the 60 days immediately preceding the start of plugging operations.
1) If, before opening the bradenhead valve, the beginning pressure is greater than 25 psi, sampling is required.
2) If pressure remains at the conclusion of the test, or if any liquids were present during the test, sampling is required.
The Form 17 shall be submitted within 10 days of the test. Sampling shall comply with Operator Guidance - Bradenhead Testing and Reporting Instructions. If samples are collected, copies of all final laboratory analytical results shall be provided to the COGCC within three (3) months of collecting the samples.
If there is a need for sampling, contact COGCC engineering for verification of plugging procedure. |