| Engineer | Form: (06)
402005606
05/03/2019 | Prior to starting plugging operations a bradenhead test shall be performed if there has not been a reported bradenhead test within the 60 days immediately preceding the start of plugging operations.
1) If, before opening the bradenhead valve, the beginning pressure is greater than 25 psi, sampling is required.
2) If pressure remains at the conclusion of the test, or if any liquids were present during the test, sampling is required.
The Form 17 shall be submitted within 10 days of the test. Sampling shall comply with Operator Guidance - Bradenhead Testing and Reporting Instructions. If samples are collected, copies of all final laboratory analytical results shall be provided to the COGCC within three (3) months of collecting the samples.
|
| Engineer | Form: (06)
402005606
05/03/2019 | Operator shall implement measures to control venting, to protect health and safety, and to ensure that vapors and odors from well plugging operations do not constitute a nuisance or hazard to public welfare. |
| Engineer | Form: (06)
402005606
05/03/2019 | 1) Provide 48 hour notice of plugging MIRU via electronic Form 42.
2) Properly abandon flowlines per Rule 1105. File electronic Form 42 once abandonment of on-location flowlines complete. Within 30 days of an operator completing abandonment requirements for an off-location flowline or crude oil transfer line the operator must submit a Flowline Report, Form 44.
3) CBL from original well completion has not been submitted to COGCC. Must submit CBL that verifies TOC at 4000’ or shallower with Form 6 Subsequent Report of Abandonment.
4) After pumping squeeze, shut down and shut well in at minimum 8 hours; verify gas migration has been eliminated. If evidence of gas migration or pressure remains contact COGCC Engineer for an update to plugging orders. |
| Engineer | Form: (04)
402455842
08/07/2020 | This approval is good for one year and a new application must be made before July 29, 2021. Updates for the planned utilization of the well should be included with the application. |
| Engineer | Form: (04)
402455842
08/07/2020 | The Form 7 reporting must reflect the well status dates reported on the Form 4-TA request. |
| Engineer | Form: (04)
402455842
08/07/2020 | If the well is not returned to production within two years (of the initial pressure test) an
MIT will be performed.
|