| Engineer | Form: (06)
401147667
12/01/2016 | 1) Prior to starting plugging operations a bradenhead test shall be performed. If the beginning pressure is greater than 25 psi, or if pressure remains at the conclusion of the test, or if any liquids were present contact COGCC Engineer for sampling requirements. The Form 17 shall be submitted within 10 days of the test.
2) Provide 48 hour notice of plugging MIRU via electronic Form 42.
3) Properly abandon flowlines as per Rule 1103. File electronic Form 42 once abandonment complete.
4) Submit referenced CBL with Form 6 (s) Subsequent Report of Abandonment. If plugging procedure needs to be adjusted based on CBL contact COGCC engineer.
5) If surface casing shoe plug is not circulated to surface then tag plug- must be 167' or shallower and provide a 10 sack plug at the surface. |