| Engineer | Form: (04 )
401517129
3/22/2018 | This approval is good for one year and a new application must be made before January 17, 2019(1 year from prior application). Updates for the planned utilization of the well should be included with the application.
A Form 5A is required to report all plugs currently downhole which isolate the perforated interval. |
| Engineer | Form: (04 )
401722624
8/6/2018 | This approval is good for one year and a new application must be made before January 17, 2019(1 year from prior application). Updates for the planned utilization of the well should be included with the application.
A Form 5A is required to report all plugs currently downhole which isolate the perforated interval. |
| Engineer | Form: (04 )
401878822
4/23/2019 | This approval is good for one year and a new application must be made before January 17, 2020(1 year from prior application). Updates for the planned utilization of the well should be included with the application. |
| Engineer | Form: (04 )
402269639
3/30/2020 | 1) This approval is good for one year and a new application must be made before 1/09/2021 (1 year from prior application). Updates for the planned utilization of the well should be included with the application.
2) The Form 7 reporting must reflect the well status dates reported on the Form 4-TA request.
3) A Form 5A is required to report all plugs currently downhole which isolate the perforated interval.
|
| Engineer | Form: (04 )
402875789
1/4/2022 | 1) This sundry to conduct bradenhead diagnostic evaluations is valid until 4/25/2022 (6 months from bradenhead test date)
2) For Wells that have sustained casing pressure above the action threshold, flows liquids or continuous
gas from the bradenhead annulus as determined through diagnostic testing and evaluation, the Operator will provide a PMP with the Form 4, including a description of the Operator’s findings from the previous 6 months, number of times the well was blown down, a current WBD and future plans for more frequent monitoring or testing, pressure mitigation, or remedial well work by 4/25/2022
3) Comply with any CDPHE, Air Pollution Control Division rules or requirements for all atmospheric discharges.
4) Complete a Form 17 Bradenhead test upon completion of diagnostic work |
| Engineer | Form: (04 )
402904599
1/11/2022 | 1) This approval is good for one year and a new application must be made before 01/09/2022 (1 year from prior application). Updates for the planned utilization of the well should be included with the application.
2) The Form 7 reporting must reflect the well status dates reported on the Form 4-TA request.
|
| Engineer | Form: (04 )
403030483
5/5/2022 | 1) Operator shall comply with COGCC Rule 419. Bradenhead Monitoring, Testing, and Reporting and Rule 420. Form 17, Bradenhead Test Report
2) At least once a year shut in bradenhead for 7 days or until the pressure reaches the bradenhead threshold and perform a bradenhead test. Report results on a Form 17, as specified in Rule 420 or other Director approved submittal method.
|
| Engineer | Form: (04 )
403209442
3/1/2023 | Updated well classification to Observation Well. Used 11/04/2022 as date well is no longer an injector. Operator to report this well as AC (Active) on Form 7. |