| Environmental | Form: (04)
400961292
12/31/2015 | Operator will submit Form 27 remediation plan by February 29, 2016. No form 19 spill report will be required. |
| Engineer | Form: (04)
401645013
07/10/2018 | This approval is good for one year and a new application must be made before May 17, 2019(1 year from prior application). Updates for the planned utilization of the well should be included with the application.
A Form 5A is required to report all plugs currently downhole which isolate the perforated interval.
The Form 7 reporting must reflect the well status dates reported on the Form 4-TA request.
|
| Engineer | Form: (06)
401890400
02/12/2019 | Plugging:
1) Provide 48 hour notice of MIRU via electronic Form 42.
2) Shoe plug (550'): Tag plug 50’ above surface casing shoe.
3) Surface plug: Cement from 50' to surface in casing and annulus.
Bradenhead:
1) If there has not been a reported Bradenhead test within 60 days of plugging this well, prior to starting plugging operations a Bradenhead test shall be performed. The Form 17 shall be submitted within 10 days of the test.
2) If before opening the Bradenhead valve, the beginning pressure is greater than 25 psi, sampling is required.
3) If pressure remains at the conclusion of the test, or if any liquids were present during the test, sampling is required.
Sampling shall comply with Operator Guidance - Bradenhead Testing and Reporting Instructions, Appendix A: Liquid and Gas Sampling.
Venting during plugging:
Operator shall implement measures to control venting, to protect health and safety, and to ensure that vapors and odors from well plugging operations do not constitute a nuisance or hazard.
Flowlines:
Properly abandon flowlines as per Rule 1105. File electronic Form 42 once abandonment is complete. Within 30 days of an operator completing abandonment requirements for an off-location flowline or crude oil transfer line, the operator must submit a Flowline Report, Form 44.
|