| Engineer | Form: (02)
400958467
01/04/2016 | 1) Operator shall comply with the most current revision of the Northwest Notification Policy.
2) Operator shall provide cement coverage from the production casing shoe (5+1/2" First String) to a minimum of 200' above the surface casing shoe to provide full isolation of the Coalmont Formation. Verify production casing cement coverage with a cement bond log. Changed First String cement top from a null value to 2300' (200' above proposed surface casing shoe depth of 2500'). |
| OGLA | Form: (04)
401003590
03/11/2016 | A closed loop system must be implemented during drilling (as indicated on the Form 2 and Form 2A). All cuttings generated during drilling with oil based mud (OBM) must be segregated from water/bentonite based mud-(WBM-) generated drill cuttings and placed separately on the well pad. All OBM-generated drill cuttings must be kept in tanks/containers, or placed on a lined/bermed portion of the well pad; prior to disposition. The moisture content of any OBM-generated drill cuttings in a tank, cuttings containment area, or pile shall be as low as practicable to prevent accumulation of liquids greater than de minimis amounts. The operator has indicated that ‘Cuttings Disposal’ will be “OFFSITE” and that the ‘Cuttings Disposal Method’ will be “COMMERCIAL DISPOSAL” (as shown in the ‘DRILLING WASTE MANAGEMENT PROGRAM SECTION’ of the Form 2A#400958033; OGCC ID#414127). All liners associated with oil-based drilling mud and OBM-generated drill cuttings must be disposed of offsite per CDPHE rules and regulations.
Any changes to drill cuttings management and disposal at this location will require submittal (via a Form 4 Sundry Notice) and approval of a Waste Management Plan detailing the changes (specifying cuttings characterization methods, cuttings management, amendment, and onsite disposal location[s]). At the time of closure, if the drill cuttings (either OBM- or WBM-generated) are to be left onsite (cuttings management area, the cut portion of the pad, cuttings trench, dry cuttings drilling pit, beneficial reuse during reclamation), they must also meet the applicable standards of Table 910-1. Although “landfarming” of E&P waste is prohibited on the location; this shall not preclude onsite disposal of E&P waste in accordance with COGCC Rules and permit conditions. Any material which does not meet Table 910-1 criteria will either be manifested and disposed offsite at an approved commercial facility, or amended further onsite to comply with Table 910-1.
If operator determines that long-term onsite management of OBM-generated drill cuttings is necessary, an approved Form 27 remediation plan and an approved Form 4 Sundry Notice requesting a reclamation variance, will be required. |
| Engineer | Form: (04)
401069433
07/11/2016 | 1) Comply with all requirements of Rule 912, including monthly reporting of flared volumes (on Form 7) and notifications to local emergency dispatch or the local government designee.
2) Submit annual updates (requests to flare) to COGCC on Form 4s (Sundry Notices),including all information specified in COGCC’s "Notice to Operators, Rule 912 Venting or Flaring Produced Natural Gas - Statewide."
3) Comply with any Colorado Department of Public Health and Environment, Air Pollution Control Division rules or requirements for all atmospheric discharges.
4) An enclosed flare shall be used, unless an open flare is specifically allowed by CDPHE’s Regulation 7.
5) Within 30 days of approval of this form, submit an Electronic Data Deliverable (EDD), prepared by the laboratory that performed the gas analysis attached to this form. The EDD shall be submitted with a new Form 4, in the format specified on COGCC’s website, located in Help => Environmental => COGCC EDD Information. |
| Engineer | Form: (04)
401423623
10/17/2017 | 1) Comply with all requirements of Rule 912, including monthly reporting of flared volumes (on Form 7) and notifications to local emergency dispatch or the local government designee.
2) Submit annual updates (requests to flare) to COGCC on Form 4s (Sundry Notices),including all information specified in COGCC’s "Notice to Operators, Rule 912 Venting or Flaring Produced Natural Gas - Statewide."
3) Comply with any Colorado Department of Public Health and Environment, Air Pollution Control Division rules or requirements for all atmospheric discharges.
4) An enclosed flare shall be used, unless an open flare is specifically allowed by CDPHE’s Regulation 7.
5) With next years annual update (request to flare), collect a new gas sample including hydrogen sulfide and submit an Electronic Data Deliverable (EDD), prepared by the laboratory that performed the gas analysis. The EDD shall be submitted with the annual update, in the format specified on COGCC’s website, located in Help => Environmental => COGCC EDD Information. |
| Engineer | Form: (04)
401833531
03/06/2019 | 1) Comply with all requirements of Rule 912, including monthly reporting of flared volumes (on Form 7) and notifications to local emergency dispatch or the local government designee.
2) Submit annual updates (requests to flare) to COGCC on Form 4s (Sundry Notices), including all information specified in COGCC’s "Notice to Operators, Rule 912 Venting or Flaring Produced Natural Gas - Statewide."
3) Comply with any Colorado Department of Public Health and Environment, Air Pollution Control Division rules or requirements for all atmospheric discharges.
4) An enclosed flare shall be used, unless an open flare is specifically allowed by CDPHE’s Regulation 7.
5) With the next annual update (request to flare), collect a new gas sample for laboratory analysis including hydrogen sulfide and submit a Form 43 to upload the laboratory results to the COGCC Environmental Database. Form 43 instructions are on COGCC’s website under Regulation => Forms => Form 43 COGCC Environmental Database.
|
| Engineer | Form: (04)
402292796
02/12/2020 | 1) Comply with all requirements of Rule 912, including monthly reporting of flared volumes (on Form 7) and notifications to local emergency dispatch or the local government designee.
2) Submit annual updates (requests to flare) to COGCC on Form 4s (Sundry Notices), including all information specified in COGCC’s "Notice to Operators, Rule 912 Venting or Flaring Produced Natural Gas - Statewide." Next sundry request due 1/23/2021.
3) Comply with any Colorado Department of Public Health and Environment, Air Pollution Control Division rules or requirements for all atmospheric discharges.
4) An enclosed flare shall be used, unless an open flare is specifically allowed by CDPHE’s Regulation 7.
5) With the next annual update (request to flare), collect a new gas sample for laboratory analysis including hydrogen sulfide and submit a Form 43 to upload the laboratory results to the COGCC Environmental Database. Form 43 instructions are on COGCC’s website
|
| Engineer | Form: (04)
402522756
01/29/2021 | 1) Flaring of natural gas shall comply with COGCC Rule 903.
2) Report metered volumes on Form 7, Operator’s Monthly Report of Operations for gas flared, sold or used on location.
3) The operator is required to obtain and maintain any required air permits from CDPHE.
4) The expectation for permanent flares controlling separators or residual gas will be an enclosed combustion device with a 98% design destruction efficiency for hydrocarbons. Operator shall manage this well so that production volumes do not exceed the combustor capacity.
5) Operator is to provide prior notification to the local emergency dispatch or the local governmental designee of any flaring or venting event.
Operator shall have an approved Gas Capture Plan or have sought and received a variance from the COGCC Commission for continued production without gas infrastructure, prior to January 15, 2022 or wells must be shut in by January 15, 2022.
This approval is for the current operator of record only, a successor operator must supply a new plan or affirm that the current plan will be abided within 30 days of acquiring the well.
|