| Drilling/Completion Operations | Form: (02 )
400796780
4/3/2015 | Cuttings Management: During drilling, LINN will keep the drill cuttings segregated on the well pad. Cuttings will not be in contact with fill material or topsoil on location. After drilling and completion operations have been completed, soil amendments such as phosphorus and nitrogen will be utilized to expedite the amendment process (if necessary). On pads where a drilling pit is present, cuttings will be used in the backfilling of those pits. On pads where no drilling pit is present due to closed-loop drilling, amended cuttings that meet the Table 910-1 levels are spread on location with topsoil and seeded as part of reclamation activities. |
| Drilling/Completion Operations | Form: (02 )
400796780
4/3/2015 | Open hole resistivity and gamma logs shall be run to describe the stratigraphy of the entire well bore and to adequately verify the setting depth of surface casing and aquifer coverage. On a multi-well pad, these open hole logs are only required on one of the first wells drilled on the pad and the Drilling Completion Report - Form 5 for every well on the pad shall identify which well was logged. |
| Drilling/Completion Operations | Form: (02 )
401523708
4/5/2018 | Cuttings Management:
During drilling, Berry Petroleum Company, LLC. will keep the drill cuttings segregated on the well pad. Cuttings will not be in contact with the fill material or topsoil on location. After drilling and completion operations have completed, soil amendments such as phosphorus and nitrogen will be utilized to expedite the amendment process (if necessary). Berry will be utilizing closed-loop drilling. Amended cuttings that meet the table 910-1 levels will be covered with 3’ of clean material during reclamation activities.
|
| Drilling/Completion Operations | Form: (02 )
401523708
4/5/2018 | In compliance with rule 317.p, Berry Petroleum Company, LLC. conducted an open-hole Resistivity Log on the first operationally feasible well on the A21 696 pad (Well: OM01A A21 696, API # 05-045-14955) located in the NE/NE qtr, Sec 21, 6S 96W, July 15, 2015. The B21 6S 96W pad is also located in the NE/NE, thus meets the criteria for rule 317.p. All wells on the B21 696 pad will have a cement bond log with cased hole gamma ray run on the production casing. The Form 5 completion Report will list all the logs run in on the subject well and identify the OM01A 696 well that was logged with the open-hole Resistivity Log. Please see attached map confirming open-hole logs near section 21. |
| Drilling/Completion Operations | Form: (02 )
402606783
6/11/2021 | Cuttings Management:
During drilling, Berry Petroleum Company, LLC. will keep the drill cuttings segregated
on the well pad. Cuttings will not be in contact with the fill material or topsoil on
location. After drilling and completion operations have completed, soil amendments
such as phosphorus and nitrogen will be utilized to expedite the amendment process
(if necessary). Berry will be utilizing closed-loop drilling. Amended cuttings that meet
the table 910-1 levels will be covered with 3????of clean material during reclamation
activities. |
| Drilling/Completion Operations | Form: (02 )
402606783
6/11/2021 | The nearby hillside(s) will be monitored for any daylighting drilling fluids throughout
the drilling of the surface casing interval. COGCC engineering staff must be notified as
soon as practicable if daylighting is observed. |
| Drilling/Completion Operations | Form: (02 )
402606783
6/11/2021 | Berry Petroleum Company, LLC will comply with all provisions of the June 12, 2008
Notice to Operators Drilling Wells
within 3/4 Mile of the Rim of the Roan Plateau in Garfield County - Pit Design,
Construction and Monitoring Requirements. |