Skip to Main Content

Incident Search

 
BradenheadView Related Related View DocsDoc
 
Facility TypeFacility ID/
API
Facility Name/
Number
Operator Name/
Number
StatusField Name/
Number
LocationLocation ID
WELL05-123-24977NESG
14-24
KERR MCGEE OIL & GAS ONSHORE LP
47120
PA
2/3/2020
WATTENBERG
90750
MEAD/WELD  123
SWSW 24 3N68W 6
336371
   
Search for Different Bradenhead:
County Code: Sequence Code:
 
Surface Casing Depth: 917 ft.
View Form/DetailsReport TypeTest DateSubmit DateWell StatusInitial Surf CasingBradenhead Flow (Start)Fluid TypeEnd Surf CasingBradenhead Flow (End)Initial Prod CasingEnd Prod CasingSample Taken?GasLiquidComments
402257329Form 1712/5/201912/9/2019PLUNGER LIFT40GAS --0 DOWN TO 0 220214Yes----surface casing produced no fluids. tubing shut in.
401960307Form 172/28/20193/5/2019PLUNGER LIFT112GAS --1 GAS 244244No----Surface casing produced no fluid. Well shut in for 15min ended with pressure. Tubing shut in.
401855678Form 1711/21/201811/29/2018 148GAS --1 WHISPER 258258No----SURFACE CASING PRODUCED NO FLUIDS. RAN TEST AN EXTRA 30 MIN; ENDED WITH 0 PSI. SHUT-IN FOR 15 MIN; ENDED WITH A WHISPER. WELL AND MASTER VALVE SHUT-IN.
400895346Form 174/14/20159/3/2015 1GAS --0 DOWN TO 0 166167No----POST REMEDIATION TEST. INITIAL POST REMEDIATION BLOWDOWN ON 4-8-15 STARTED WITH A WHISPER BLEW DOWN TO ZERO PSI. SC DID NOT PRODUCE ANY FLUID. 15 MIN BUILD UP, DEAD. TEMP SHUT IN FOR HZ PREP AND TORN APART UPON ARRIVAL.
400828826Form 174/14/20154/22/2015PLUNGER LIFT1GAS --0 DOWN TO 0 166167No----POST REMEDIATION TEST. INITIAL POST REMEDIATION BLOW-DOWN ON 4-8-2015 STARTED WITH A WHISPER, BLEW-DOWN TO 0 PSI. SURFACE CASING DID NOT PRODUCE ANY FLUID. 15 MINUTE BUILD-UP, DEAD. TEMP. SHUT-IN FOR HZ PREP AND TORN APART UPON ARRIVAL.
400660470Form 177/31/20148/11/2014PLUNGER LIFT320GAS --198 GAS 621623No----SC produced no fluid. Blew down well an additional 30 mins, ending pressure was 76 psi.
400659903Form 177/30/20148/8/2014PLUNGER LIFT404GAS --236 GAS 614614No----Monitored extra thirty minutes and shut in surface casing for 15 minutes stayed at 236psi. Surface casing produced no fluids. Performed form 17 test as requested by Anne Kremer